Optical networks

FC-SM-200 is 60 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.652.D t

Ubiquiti UOC-3 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 3m length and LC-LC duplex connectors.

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

XQ+85MP01D is a Multimode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels of 25 Gbps, one 12-fiber MPO connector for connection up to a distance of 100 m. The module is compatible with all active elements from M

XS+31LC10D is a singlemode SFP / SFP+ / SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with, wavelength of 1310nm and two LC connectors for connection up to a distance of 10km

ML-S5531-out-20 is a 1.25G WDM SFP module with wavelengths Tx1550/Rx1310nm, one LC connector and a maximum distance 20km over single-mode optical fiber. SFP module supports DDM - digital diagnostics monitoring. The industrial version of the SFP module

ML-S3155-out-20 is a 1.25G WDM SFP module with wavelengths Tx1310/Rx1550nm, one LC connector and a maximum distance 20km over single-mode optical fiber. SFP module supports DDM - digital diagnostics monitoring. The industrial version of the SFP module

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

Masterlan optical outdoor patch cord suitable for outdoor installations, such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are tw

TL-FC311B-2 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 1000Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100/1000 Mbps speed. The con

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). T

UFiber GPON SFP modul with PN: UF-GP-C+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

ST24M1 is a white-colored splice tray with a transparent cap and four rigid combs for up to 24 welds. Splice trays can be stacked incl. lids, which are additionally covered with a practical sticker to describe each fiber. The combs are compatibl

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link

TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link

TL-SM331T is a universal Gigabit SFP metal module with RJ45 connector for metal cable with a data rate of 10/100/1000 Mbps. The range of the module is up to 100m, it has a durable metal chassis, which helps with good heat dissipation.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

Huawei OptiXstar EN8255X6s-8X is an XGS-PON and Wi-Fi 6 routing-type ONT. It uses the XGS-PON and Wi-Fi 6 technologies to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performan

The Huawei OptiXstar EN8145B7Ns is an intelligent ONT router utilizing XGS-PON and Wi-Fi 7 technologies. It provides ultra-broadband access, high performance, and wide coverage. The device features 1x 2.5Gbit Ethernet port,

Masterlan FBOX2 is a 23mm-thick optic socket outlet. It is the ideal product for building FTTH metro networks (Fiber To The Home). Allows to ending 2x SC simplex / 2x LC duplex or 2x E2000 simplex connectors. The socket can be screwed on a pl

UF-NANO is a compact and at the same time robustly built GPON terminal element with an LED display for displaying the current throughput / IP address and the status of the Ethernet and optical line. The speed of the PON line is maximum (Rx/Tx) 2.488 /

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTi

UF-SPLITTER extends the range of Ubiquiti products for GPON solutions. PLC optical splitters are a key building block for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection att