Powering

UniFi Switch Enterprise 8 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 80 Gbps, (8) 2.5-Gigabit LAN ports and two SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out with an

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your netw

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 0.5m long. The cable is very robust, contains 2 wires

AGM lead acid battery with 12V voltage and 12Ah capacity with Faston 6.3mm connectors. Expected service life of 10-12 years. This battery is suitable, for example, as a replacement for the original battery in your UPS.

The USW-Pro-48 is a manageable Gigabit L2 switch with 48x Gigabit LAN ports and four SFP+ ports with a transfer rate of 10Gbps. In addition to the standard equipment, the switch also has a 1.3" touch screen for providing informatio

This is highly versatile, highly compactible desktop (with the option to buy rack mounts) unmanageable PoE switch called POESG-8-7P. The switch has 8x 10/100/1000Mbps ports whereas on seven ports you can use PoE Out function and thus connect/power any

Cambium Networks - Gigabit Poe injector N000000L034B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 30W, which is sufficient for the devices such as: e6

The passive PoE extractor is used to separate data and power connector at the end of the cable. Especially suitable for routers, APs and switches without passive POE support. PoE does not supports 802.3af/at specification. Pins 4,5 (-) and 7,

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M8 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

Lead-acid battery with 12V and 120Ah capacity. The battery is equipped with two M8 connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage. The

PSBT-19-16P-250 is a 16 port 10/100Mbps PoE switch without management with two additional Gigabit LAN ports, which only one is a LAN/SFP combo. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W/port)

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

Panel integrating 6 passive Gigabit PoE injectors into a single panel. Professional solution for remote power supply of a large number of active elements with support for passive PoE. By adding this walk-through panel, you get a pow

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 1.5m long. The cable is very robust, contains 2 wires

TP-Link's Jetstream TL-SG2428P PoE Switch is a manageable L2 switch with PoE functionality, containing 24 Gigabit LAN ports with 802.3af/at PoE support and an additional 4 Gigabit SFP ports. The switch has a total PoE budget 250W for all devices poweri

TL-SG1005P is a 5 10/100/1000Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situatio

Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/5 (E)

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering MikroTik devices with an input voltage 24V DC. The power adapter has a maximum power of 29W and a maxi

Spínaný zdroj AD-155A od značky MEAN WELL se vyznačuje funkcí nabíjení. Výstupní napětí je 13.8V DC, maximální proud je 10.5A.

Svorka (+) je spojená se žílou konektoru BNC. Svorka (-) je spojená s konektorem obrazovky BNC. SPECIFIKACE : Typ konektoru: Přechod BNC Konektor / svorkovnice; Připevňování prvků konektoru: Impedance: 75 ohm; Materiál: Kov / PET; Velmi jednoduchá a ry...

Pure sine backup power supply sinusPRO-500EBlack for device backup in case of 230V power failure. If there is a mains power failure, SinusPRO will automatically, within a fraction of a second, switch to power mode from the connected battery, and the co

Lead battery with voltage 12V and capacity 9Ah. The battery has faston 6,3mm connectors for connecting your device. Battery life is 10 years. The battery is suitable for use with a voltage converter as a backup power supply or as a replacement battery

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering MikroTik devices with an input voltage 24V DC. The power adapter has a maximum power of 29W and a maxi

We recommend this backup resource for its flexible use. Net sine output. Ideal for long-term backup. maximum continuous power 600W integrated smart charger 10A max robust metal design cables for connecting

The Long-range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network's range. With its (2) GbE RJ45 ports, the UACC LRE can receive 802.3af/at PoE/PoE+ while providing passthrough

PoE injector POE1A2L is used to power WiFi devices via Ethernet cable using so-called passive PoE. This PoE injector has 2.1/5.5mm power connector and two Ethernet ports, of which the port labeled PoE is toward the powered device. Passive PoE is

MikroTik OEM industrial pulse power supply is designed for telecommunication systems, alarms and access control systems, portable industry and energy. The power supply has a covered terminal block on the front, input voltage of 100~120V - 60Hz / 200~22

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent pro

8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities. Port Priority Function Priority (port 1=port 2=port