Active PoE
D-Link DEM-312GT2 1000BASE-SX multi-mode SFP transceiver
Description; The DEM-312GT2 is a high performance 1310nm multimode SFP/(miniGBIC) transceiver. Supporting full duplex, Gigabit speeds on multimode fiber for distances of up to 2km on 62.5µm or 50µm fiber. The unit features a metal housing to reduce EMI...
D-Link DEM-CB100Q28 pasisive 100G QSFP28 Direct Attach Cable 1m
D-Link DEM-CB100Q28 je 100G QSFP28 pasivní DAC (Direct Attach Cable) propojovací kabel o délce 1 metr. Poskytuje širokopásmové připojení rychlostí 100 Gb/s pro přepínače a zařízení se 100G QSFP28 porty. Používá se také jako stohovací kabel pro HW stack...
D-Link DGS-712 SFP 10/100/1000 BASE-T Copper Transceiver
- Up to 1.25Gbps bidirectional data links; - Hot-pluggable SFP footprint; - Fully metallic enclosure for low EMI; - Low power dissipation (1.2W typical); - Compact RJ-45 connector assembly; - Access to physical layer IC via 2-wire serial bus; - 10/100/...
D-Link DPE-302GE 2-Port Gigabit PoE Extender
D-Link DPE-302GE je 2-portový Gigabit Ethernet IEEE 802.3af PoE / 802.3at PoE+ extender pro prodloužení dosahu Ethernet sítě a PoE napájení. Možnost řetězení až 4 jednotek za sebe, tzn. prodloužení dosahu až na vzdálenost 500m, při použití standardních...
D-Link DPS-500A 156W Modular Redundant Power Supply
The DPS-500A redundant power supply (RPS) are designed to conform to the wattage requirements of D-Link’s Ethernet and Gigabit switches. It is an external RPS unit enclosed in solid metal cases with sockets to connect to an AC power sources on one end ...
D-Link Redundant Power Supply for DGS-1520-28 and DGS-1520-52
The DPS-520 provides power supply redundancy and resiliency for Power over Ethernet (PoE). It ensures continuous device activity and offers protection against device power supply failures by providing seamless failover for D-Link switches such as the D...
D-Link DPE-301GS 1-Port Gigabit 30W PoE Splitter
The DPE-301GS Gigabit PoE+ Splitter provides Gigabit connectivity and high wattage electrical power to legacy devices that do not support PoE, by separating power and data from a PoE source. Main type of ports 1000BASE-T Gigabit Ethernet; PoE options 8...
D-Link DPE-101GI 1-Port Gigabit PoE Injector
The DPE-101GI Gigabit PoE Injector is designed to supply a power and data connection to PoE devices such as an IP Camera or Wireless Access Point. The IEEE 802.3af compliant DPE-101GI gives you the ability to mount your PoE device virtually anywhere in...
D-Link DPE-301GI 1-Port Gigabit PoE Injector
Extend Your Existing Wireless Network; The IEEE 802.3at (PoE+)/802.3af (PoE) compliant DPE-301GI Gigabit PoE+ Injector is designed to supply data and up to 30 watts of power to PoE-enabled devices such as network cameras and wireless access points. The...
Ubiquiti INS-3AF-USB - PoE converter 802.3af/5V USB, indoor
USB converter serve to powering any device by USB port. Its converting 802.3af PoE to 5V/2A with 10W maximum load. Example of installation Important note: converter does not convert data from Ethernet to USB, but only power
MaxLink DIN60 PoE injector - 12-48VDC, 802.3af/at/bt, 55V, 1.1A, 60W, 1Gbit
MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi
MaxLink DIN60F PoE injektor - 12-57VDC, 802.3af/at/bt, 55V, 1.1A, 60W, 1xSFP, 1Gbit
MaxLink MAXPIDIN60F is an active DIN rail mounting PoE injector with DC power input from 12 to 57 V and built in power converter. Injector has one POE LAN port output and one SFP port output. The output of this power supply is 1Gbit port with su
MaxLink PI15W PoE injektor - 802.3af, 48V, 320mA, 15,4W, 1Gbit
MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp
MikroTik GPEN11 Gigabit Fixed PoE injector
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga
MikroTik GPER - Gigabit Passive Ethernet Repeater
The GPeR unit allows to extend Ethernet cable by additional hop (
MaxLink PI30F PoE injector - SFP, 802.3af/at, 55V, 550mA, 30W, 1Gbit
MaxLink PI30F is a high-quality Gigabit POE injector with a single POE port, LAN port and one SFP port for powering 802.3af/at devices with maximum power consumption up to 30W. For better distribution of current load, power is applied to
MaxLink PI90 PoE injector - 802.3af/at/bt, 55V, 1,75A, 95W, 1Gbit
MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als
TP-Link PoE++ injector 380S
The Omada 10G PoE++ injector allows you to transmit data and power your devices with a single cable. It includes 1 LAN port with 10Gbps speed as output with PoE and 1 LAN port with 10Gbps speed for input connection. It is fully compliant with 802.3bt/a
MaxLink PoE Convertorr, 802.3af/at to 24V 24W
Product description prepares.
Cambium Networks - 5GbE PoE injector 56V/1,07A (60W)
Cambium Networks - 5GbE PoE injector N000000L142A is a high-quality 5GbE PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 60W, which is sufficient for the devices such a
Cambium Networks - 10GbE PoE injector 56V/1,07A (60W)
Cambium Networks - 10GbE PoE injector C000000L141A is a high-quality 10GbE PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 60W, which is sufficient for the devices such
MaxLink Gigabit 8 ports PoE panel, 802.3af/at
POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por
MaxLink Gigabit 4 ports PoE panel, 802.3af/at
POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por
POE splitter for Raspberry Pi A/A+/B/B+/2B/3B/3B+ micro USB
With this adapter, you can power Raspberry PI (all models), other single-board computers, and other devices powered by the Micro USB connector. This allows you to use these devices very flexibly and we don't need a power outlet or AC adapter. T
Cambium Networks - Gigabit PoE injector 56V/0,268A (15W)
Cambium Network - Gigabit Poe injector N000900L017B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 15W, which is sufficient for the devices such as cnPilot
Cambium Networks - Gigabit PoE injector 56V/0,54A (30,5W)
Cambium Networks - Gigabit Poe injector N000000L034B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 30W, which is sufficient for the devices such as: e6
POE splitter for Raspberry Pi IEEE802.3af to USB-C
S tímto adaptérem můžete napájet Raspberry PI i jiné jednodeskové počítače a další zařízení s napájením přes USB type C konektor. Díky tomu můžete tato zařízení velmi flexibilně použít a nepotřebujeme žádnou zásuvku ani síťový adaptér. Tímto adaptérem ...
Ubiquiti UACC-LRE, Long-range Ethernet Repeater
The Long-range Indoor/Outdoor Repeater (UACC LRE) is Gigabit adapter that allows you to easily and inexpensively expand your Ethernet network's range. With its (2) GbE RJ45 ports, the UACC LRE can receive 802.3af/at PoE/PoE+ while providing passthrough