DeLock converter USB-> COM DB9 cable 1.8m blue

Product description

USB to serial adapter enables you to connect a serial device, eg. A mouse, modem, etc. To a free USB port on your computer or laptop. Specification • USB 1.1 interface • RS232 serial interface with DB9 connector • Connector with screw nuts • Cable length 1.8 m • Data transfer rate over 1 MbpsSystémové requirements • Windows 98 / 98SE / ME / 2000 / XP / Vista / 7, Mac OS from 8.6 • PC or notebook with USB portemObsah • USB serial adapter • Driver CD • User příručkaBalení • Blister can not be used for devices that do not communicate with the PC at the Windows driver for the serial port - applications that communicate with the serial port and IRQ level Ports can not fungovat.Osazeno chip Prolific PL-2303 (http://www.prolific.com.tw) FAQ: Q: Does PL-2303 support serial keyboard and mouse? A: In Windows 98 and ME, the PL-2303 driver has two parts: one is the virtual COM port driver, and the other one is the USB driver support. The PL-2303 can not support serial keyboard and mouse Because The PL-2303 does not take any IRQ resouce That is required by serial keyboard and mouse to interrupt OS. In Windows 2000 or XP, the PL-2303 driver was made by Microsoft's WDM and only have one driver on port class registers. In the WDM driver, the COM port driver is somewhat close with the HID interface, with PL-2303 driver have some features Similar to HID That May allow some serial mouse / keyboard to work on the PL-2303rd Referring to: since there is a very small number of traditional serial keyboard / mouse available now and not enough resources, we already Considered this issue as a limitation. Q: How do I change the COM port number of the USB to Serial cable bridge under Windows 98SE or Windows ME? A: If your computer comes with physical COM port, it is most Likely to Occupy the COM1 and COM2 Even if there are two physical ports. After the USB to Serial Bridge Driver is Installed, it will create a virtual COM port and the default setting assigned by the OS will be COM2 or COM3 if there are two physical COM ports on your computer. If you want to change the assigned COM3 for the USB-Serial Bridge to the COM1, please follow the steps as below under Win98SE or WinMeQ-1: How to change the sequence of the COM Port position created by the USB-Serial Bridge? ANS : If your system comes with physical COM port, Then it will Occupy the COM1 and COM2 Even if your system has two. After USB-Serial Bridge Driver is Installed, it will create a virtual COM port and the default setting if the OS is the COM2 or COM3 if there are two physical COM ports on your system. If you want to change the COM3 created by USB-Serial Bridge to the COM1, follow These steps: first Double click My Computer, Control Panel, System.2. Click Device Manager tab.3. Click "Ports (COM