The PowerBox Pro is an outdoor five gigabit ethernet port router with PoE output on four ports. Since the device has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive or s

Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead

RBMetalG-52SHPacn is a new, completely waterproof, robust and high-performance RouterBOARD designed for mounting directly on the antenna with N female connector. The new model unites 2 earlier products into one, and the radio part now works in b

RouterBOARD RB922UAGS-5HPacD is a very versatile wireless router, perfect for assembling your own solution. It supports the new 802.11ac standard for high speed wireless (up to 866Mbit datarate and 20/40/80MHz channels). The device has ports and slots

XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, conne

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering MikroTik devices with an input voltage 24V DC. The power adapter has a maximum power of 29W and a maxi

You can’t buy safety, but you can buy an RBGESP surge protector and keep your setup safe. RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would

Chateau LTE18 ax is a Dual Band 2.4/5GHz Wi-Fi 6 router for home or small businesses with (4) Gigabit LAN + (1) 2.5-Gigabit ports , LTE18 modem, one USB port, L4 license and extra fast 4-core ARM 1800MHz CPU, 128MB i

MikroTik Cloud Smart Switch CSS610-8P-2S+IN is a manageable, 8-port Gigabit PoE Switch with two SFP+ slots (backwards compatible with SFP modules as well), without a fan and a kit for attaching to a 19" rack. The Switch has a 140W

Rackmount kit RMK-2/10 allows the installation of two smaller MikroTik devices with a width of 200mm in traditional 19 inch data cabinets. Alternatively, you can permanently remove the longer part from both brackets and install only o

RB5009UPr+S+OUT is a high performance PoE router that comes with passive cooling, IP66 outdoor chassis and high performance (60 - 90% higher than RB4011) which is due to the 64-bit ARM architecture of the proc

LHG LTE18 kit is a device used to connect to a mobile 3G/LTE network. Place it outside on a pole or anywhere high enough and connect where there are no cell phones. Thanks to the large, high-gain antenna, the device can connect to transmitters e

L11UG-5HaxD powerful Wi-Fi 6 radio with MMCX connectors enables further customization. The board is equipped with 1 gigabit LAN, USB port and Wi-Fi 6 5GHz radio. For powering device there is a DC jack or passive PoE. The maximum power consumption of th

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products.

Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz

MikroTik 24V2APOW is a replacement internal power supply that is specially designed for some MikroTik devices. Total power is 60W at 24V and 2.5A max. current. Compatibility with these models CCR1009-7G-1C-1S+ CRS31

The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. CRS317-1G-16S+RM is

Wi-Fi has to be fast, reliable, easy to manage, it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses!

Chateau LTE6 ax is a Dual Band home WiFi router with 5x Gigabit LAN ports and LTE category 6 modem including one USB 2.0 port and a micro SIM card slot. The wireless part of 2.4 GHz provides a modulation speed of

LoRa omnidirectional antenna with 6.5dBi gain for the 824 - 960MHz band with one SMA female connector and IP66 protection. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole with a

The ATL LTE18 kit is a device used to connect to a mobile 3G/LTE network. Put it outside on a pole or just in a high enough place and it's there where cell phones don't have a signal. Thanks to a large radome antenna

SwOS/RouterOS powered 24 port Gigabit Ethernet desktop switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you pr

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses LoRa (863 - 870 MHz), Narrow Band and CAT-M technology. Because of the low cost, low band

The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: Interface mana

MikroTik Cloud Smart Switch CSS610-8G-2S+IN is managable, 8-ports Gigabit switch with two SFP+ slots, completely silent fanless and kit for attach to 19" data cabinet. It also includes a specially designed operating system for fast switch

XQ+31LC02D is a Singlemode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels, wavelengths 1271nm, 1291nm, 1311nm, 1331nm and two LC connectors for connections up to a distance of 2 km. The module

An extra cost-effective upgrade of our previous R11 LTE4 modem. It offers the same speed (up to 150 Mbps) and features as the earlier version.

FTC11XG is a 10Gbps fiber-to-metal converter with an implemented switch-chip, SwOS Lite management (VLAN support, LAG, IGMP, SNMP, ACL, traffic shaping...) in outdoor design with IP55 protection. This converter has one Gigabit LAN port wi

Power adapter with output voltage 48V DC, maximum current 0.95A, total output power 45,6W and connector 5.5 / 2.1mm. The power source is part of the MikroTik GPEN concept, which provides all the benefits of GPON.