The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Etherne

SolidMOUNT je kovový, precizní, nastavitelný držák s jemným lazením pomocí dvou postranních šroubů s matkami. Držák je kompatibilní se všemi jednotkami ze série LHG, včetně větších LHG XL modelů. Na jednotku se instaluje pomocí 4 šroubků, jenž jsou sou

The CRS309-1G-8S+ is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps

The RB4011 uses the amazingly powerful quad core cortex A15 chip from annapurna labs, an amazon company, same as in your grade rb1100AHx4 unit. The CPU supports IPsec hardware acceleration, there is 1GB of RAM, so this device will easily handle any tas

R11e-2HPnD is our new 802.11b/g/n Dual Chain high power 1000mW miniPCI-e card, operating in full 2192-2732 MHz frequency. Ideally suited for the new RB912 series, RB800 or our new miniPCIe adapters - RB14e/RB14eU. Unit is equipped with two MMCX connect

R11e-2HnD is a Low-profile Lower power version of our 2.4Ghz miniPCIe card - it has a small heat-sink, u.Fl connector and less output power (800mW). Low profile is useful if you need to install the card in device like a laptop.

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 19W and

The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one

The RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included). It is powered by

The Light Head Grid (LHG) is a compact and light wireless device with an integrated 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances. The gr

The hAP ac is a Dual-band Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time. This router is equipped with 5 Gigabit LAN ports and 1 SFP port. The device is very small and will look good in a

A small package with a huge ambition – the wAP ac LTE6 is an extremely cost-effective dual-band (2.4 / 5 GHz) home access point based on our popular weatherproof wAP form factor. It has two Gigabit Ethernet ports – you can use the device

If you are working with substantial amount of data – like providing Internet access or maintaining a huge data center – this is the perfect upgrade for your setup. CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and s

Due to popular demand, we bring you a sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection

Professional high-frequency SMASMA cable from MikroTik designed for use in the LTE industry, for example for connecting LTE CPE unit and an LTE antenna. The 1m cable is terminated with two SMA male connectors. For better protection agains

You can’t buy safety, but you can buy an RBGESP surge protector and keep your setup safe. RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would

MikroTik Cloud Router Switch CRS518-16XS-2XQ-RM is a feature-packed backbone switch for your network and features 2× QSFP28 (100 Gbps), 16× SFP28 (1/10/25 Gbps), one 10/100Mbps metal port intended

A white power adapter with direct installation into a socket with an output voltage of 5V DC, a maximum current of 2.4A, a total output power of 12W and a USB-C connector. The input plug to the socket is EU type.

L11UG-5HaxD powerful Wi-Fi 6 radio with MMCX connectors enables further customization. The board is equipped with 1 gigabit LAN, USB port and Wi-Fi 6 5GHz radio. For powering device there is a DC jack or passive PoE. The maximum power consumption of th

Take advantage of the blazing fast 2.5/10 Gigabit combo and upgrade your workspace! Even small offices are shifting from Gigabit connections to the lightning-fast realm of 2.5 Gigabit connectivity. With CRS310-8G+2S+IN, we aim to give you the tools

Mikrotik Chateau 5G R16 is a home dual-band router for very demanding users. Quality connectivity anywhere is ensured by supporting 4G and 5G and simultaneously using the LTE module or classic 2.5GHz and 5GHz. For LAN connectivity, the router fe

Chateau LTE6 ax is a Dual Band home WiFi router with 5x Gigabit LAN ports and LTE category 6 modem including one USB 2.0 port and a micro SIM card slot. The wireless part of 2.4 GHz provides a modulation speed of

Optical Cloud Router Switch CRS504-4XQ-IN is a suitable 19" rackmount solution for access to 100 Gbps networks and as a small central optical switch that offers 4x QSFP28 s at 100 Gbps, 1x Ethernet port with support

Bluetooth tags play a huge role in IoT setups, where Bluetooth is used to broadcast the data over short distances. You can use these small devices for proximity-based tracking of various objects. For example, if you have a KNOT gateway in

The new flagship Cloud Core Router 2216 with a very strong configuration designed for the most exposed places of your network and in compared to CCR1072 it is up to 4x more powerful!. There is 12x SFP28 at 1/10/25 Gbps,

Outdoor AC/DC power supply in a durable metal chassis with output voltage 26 V, max. output current 9.4 A, total power 250 W suitable for a series of netPower products from MikroTik. The chassis is IP67 certified with extra protec

XS+31LC10D is a singlemode SFP / SFP+ / SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with, wavelength of 1310nm and two LC connectors for connection up to a distance of 10km

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering MikroTik devices with an input voltage 24V DC. The power adapter has a maximum power of 29W and a maxi

Need a reliable and strong long-distance connection that never goes down? The new LHG XL 52 ac will provide just that with its dual-band capability. You can easily setup the 5 GHz channel as the main one with speed up to 600 Mbps and use the 2.4 GHz ch