SFP optical modules

ML-S28-MM-100 is a multi-mode SFP28 module with a wavelength of 850nm, a speed of 25 Gbps, 2x LC connectors and a maximum distance of 100m. SFP module supports DDM - digital diagnostics monitoring. The LC connectors in the SFP module have UPC

ML-S28-SM-10 is a single-mode SFP28 module with a wavelength of 1310nm, a speed of 25 Gbps (supporting lower speeds of 1 Gbps and 10 Gbps), 2x LC connectors and a maximum distance of 10km. SFP module supports DDM - digital diagnostics monitoring.

ML-S28-2733-SM-10 is a single-mode 25G WDM SFP28 module with wavelengths Tx1270/Rx1330nm, one LC connector and a maximum distance of 10km. Module supports DDM - digital diagnostics monitoring.. WDM modules use only one optical fiber for bidir

ML-S28-3327-SM-10 is a single-mode 25G WDM SFP28 module with wavelengths Tx1330/Rx1270nm, one LC connector and a maximum distance of 10km. Module supports DDM - digital diagnostics monitoring.. WDM modules use only one optical fiber for bidir

XS+85LC01D is a multimode SFP/SFP+SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with a wavelength of 850 nm and two LC connectors for connections up to a distance of 100 m. The mod

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

The SM6110-SR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-SR high performance 850nm multi-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connections u

The SM6110-LR is designed to extend transfer distances based on 10G/25G Ethernet connectivity. It is a 10G/25GBASE-LR high performance 1310 nm single-mode SFP+/SFP28 transceiver. It supports full duplex, 10G/25G Ethernet connection

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

TP-Link TL-SM7110-SR is a 40Gbps QSFP+ module with an 850nm wavelength, MPO connector, and a maximum distance of up to 150m over OM3 multimode optical fiber. It supports the OMCI protocol and DDM (Digital Diagnostic Monitori

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 2 km. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

10G singlemode optical CWDM module with a wavelength of 1270nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

10G singlemode optical CWDM module with a wavelength of 1310nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

10G singlemode optical CWDM module with a wavelength of 1290nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

The TL-SM5110-LR is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission both ways) SFP+ transceiver with support for the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a di

The SM5110LSB-10 is a high-performance Single Mode, Bi-Directional (uses one fiber for data transmission in both directions) SFP+ transceiver supporting the 10GBASE-BX standard. It supports bi-directional transmission at a speed of 10Gbps over a

Teltonika PR4JR20K is a Gigabit cooper RJ45 transceiver. The module has a range of 100m.

Teltonika PR4LC21K is a set of single-mode 1G SFP WDM modules for data transmission using a single fiber with one LC connector. The wavelength (Tx and Rx) of these modules is 1310 and 1550nm, making them suitable for connections up to 20km

Teltonika PR4DU22K is a 1.25G SFP module with an 850nm wavelength, two LC connectors, and a maximum distance of 550m over multimode optical fiber.

Maxlink ML-S31D-20-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors i

Maxlink ML-S31D-3-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 3km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors in

Maxlink ML-S+31D-10-H3C is a 10G SFP+ module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP+ module supports monitoring (DDM). The LC connectors

Maxlink ML-S5531-20-H3C is a 1.25G SFP WDM module with a Tx 1550 / Rx 1310 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S3155-20-H3C is a 1.25G SFP WDM module with a Tx 1310 / Rx 1550 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S+2733-10-H3C is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).