Tinycontrol 5G7A-M Gigabit POE injector
We are sorry, this product is no longer in our offer.
Parameters
Technical parameters
Connectors and Interfaces
Ethernet speed [Mb/s]:
10/100/1000
Gigabit LAN:
Yes
Power
The input voltage [V]:
12 .. 56V DC
Pin powering:
4,5 (+), 7,8 (-)
PoE Out ports:
5
Output Voltage [V]:
12 .. 56V DC
Output Current [A]:
7
Physical characteristics
Rackmount:
Yes
LED indication:
Yes
Operating temperature [°C]:
-20 up to 65
Width [mm]:
170
Height [mm]:
45
Depth [mm]:
78
Software
Default IP address:
192.168.1.100
Default login and password:
admin / admin
Product description
Gigabit PoE injector is manufactured in our company to the needs of operators, wireless internet. As the only passive PoE device can deliver up to 1.5A power supply cable Ethernet standard 1 Gb/s. This effect was achieved using special, high current transformers on signal lines ethernet manufactured in Poland for our order. Power signal is introduced only four lines in accordance with the passive PoE 100 Mb/s, so that the device is completely compatible with the slower version of the LAN.
PoE injector meet the power requirements of 12V to 56V. As an option, we have also introduced a remote management over LAN switching PoE power on each output separately and automatic watchdog function. It monitors to communicate with devices on the specified IP addresses and failure to respond ICMP resets properly adjusted output PoE. This additional management option is realized by LAN Controller - a device of our production, which has led out on the front panel analog input, logic input and output relay - for use according to the needs of the user, eg. detection of opening cabinets, measuring the battery voltage, the inclusion of fan and so on. There is also a digital temperature measurement port on the bus 1wire with DS18B20 sensors.
A practical solution is also the case of height and depth, and an optional 1U mounting bracket on the DIN-rail.
Bussines information
Adam Ocásek, +420 725 107 259 , adam.ocasek@discomp.cz