Optical networks

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switches or

UF-SM-10G is singlemode 10G SFP+ module with 2 LC connectors. Wave length is 1310nm and it is suitable for distance up to 10km. Module is compatible with all Ubiquiti devices which contain SFP+ ports. Package contains 2 pieces.

UF-RJ45-1G is Gigabit SFP metalic module with RJ45 connector for metalic cable wih 10/100/1000Mbps data rate. Range is up to 100m. The module is primarily designed for UniFi switches where you want to increase the number of metallic ports. The module i

UF-MM-1G is multimode 1G SFP module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 550m. Module is compatible with all Ubiquiti products which contain SFP ports. Package contains 2 pieces.

Ubiquiti UOC-2 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 2m length and LC-LC duplex connectors.

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 2 pieces.

The UFiber WiFi6 GPON CPE (UF WiFi6) is a point-to-multipoint WiFi 6 device that creates high-speed GPON connections capable of reaching a 2.4 Gbps downstream rate and 1.2 Gbps upstream rate. The UF WiFi6 has (4) GbE RJ45 LAN ports and (1) GPON WAN port t

Ubiquiti UOC-1 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 1m length and LC-LC duplex connectors.

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switc

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 3 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 3m or 30m variants. The cable is ideal for creating short connections between switches, routers,

Ubiquiti UOC-0.5 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 0,5m length and LC-LC duplex connectors.

UF-NANO is a compact and at the same time robustly built GPON terminal element with an LED display for displaying the current throughput / IP address and the status of the Ethernet and optical line. The speed of the PON line is maximum (Rx/Tx) 2.488 /

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

UF-Instant is a GPON SFP module with one SC connector and is designed for Ubiquiti Network EdgeSwitch, EdgeRouter, UniFi Switch and USG series or with UF-AE and F-POE-G2 products. The module will work up to distance 20km and is able to

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m or 0.15m variants. The cable is ideal for creating short connections between switches, routers,

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

UF-SM-1G-S is set of singlemode 1G SFP WDM modules with 1 LC connector. Wave length is 1310/1550nm, this modules are suitable for distance up to 3km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package contains

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 10 m long but is also available in other variants. The cable is

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 3 m but is also available in other variants. The cable is ideal for creating short connections between switche

The UF-SM-PATCH-UPC-APC features an SC/UPC connector on one end of the cable and a SC/APC connector on the other end to help you build out your GPON network.

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 20 m long but is also available in other variants. The cable is

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 30 m long but is also available in other variants. The cable is

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 5 m long but is also available in other variants. The cable is

Passive DAC cable is used for direct connection of two SFP+ ports with line 10 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switches or ro

UF-ADAPTER-APC-50 optical adapter from Ubiquiti simplex with SC connector on each side with APC polishind type, designed for singlemode cables. It is used for connecting eg two optical patch cables. The package contains 50 pieces of these connectors.

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con