Optical networks

Masterlan optical outdoor patch cord suitable for outdoor installations such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are two

Masterlan optical outdoor patch cord suitable for outdoor installations such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are two

ML-S28-SM-10 is a single-mode SFP28 module with a wavelength of 1310nm, a speed of 25 Gbps (supporting lower speeds of 1 Gbps and 10 Gbps), 2x LC connectors and a maximum distance of 10km. SFP module supports DDM - digital diagnostics monitoring.

MC211CS-20 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 1000Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100/1000 Mbps speed. The conv

ML-S28-2733-SM-10 is a single-mode 25G WDM SFP28 module with wavelengths Tx1270/Rx1330nm, one LC connector and a maximum distance of 10km. Module supports DDM - digital diagnostics monitoring.. WDM modules use only one optical fiber for bidir

ML-S28-3327-SM-10 is a single-mode 25G WDM SFP28 module with wavelengths Tx1330/Rx1270nm, one LC connector and a maximum distance of 10km. Module supports DDM - digital diagnostics monitoring.. WDM modules use only one optical fiber for bidir

Optical ground coupler with the possibility of installation underground or outside, for example on a pole, and is used to connect optical cables, in a maximum of 48 fibers in one built-in double-sided optical cassette. Each side of th

UF-SPLITTER extends the range of Ubiquiti products for GPON solutions. PLC optical splitters are a key building block for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection att

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2

Masterlan duplex optic fibre coupler for LC connectors with APC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

10G singlemode optical CWDM module with a wavelength of 1310nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

Maxlink ML-S31D-20-HPE is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors i

ML-S+31D-40 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 40km. Module is "cisco compatible", so it is compatible with almost all active devices.

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with UPC endface polishing. Cable length 1.5 m

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one LC connector with UPC endface polishing. Cable length 3 m.

FC-SM-300 is 90 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

The S-55DLC80D is a singlemode Gigabit SFP module with a 1550nm wavelength, two LC connectors and maximum distance up to 80km. The module iscompatible with all MikroTik products, that have SFP or SFP+ cages and other cisco compliant devices.

XS+31LC10D is a singlemode SFP / SFP+ / SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with, wavelength of 1310nm and two LC connectors for connection up to a distance of 10km

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

TL-FC111A-20 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 100Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100Mbps speed. The converter

TL-FC111B-20 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 100Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100Mbps speed. The converter

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

Modern, elegant industrial design, robust construction, and high performance – that’s the Wave-Fiber-ONU, a client unit for GPON solutions. The device functions as a converter from copper to fiber and supports both Bridge and Router modes. It fe

FTC21 is an optical-metallic converter equipped with a switch chip, SwOS Lite management (supporting VLAN, LAG, IGMP, SNMP, ACL, traffic shaping, etc.), in an outdoor enclosure with IP55 protection. This converter features 2x Gigabit LAN

Masterlan optical outdoor patch cord suitable for outdoor installations such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are two

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

Masterlan outdoor armoured optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A