MikroTik

The Mikrotik GPER14i is a manageable outdoor PoE extender, perfect for extending power to your outdoor devices such as Wi-Fi access points and IP cameras. It features 4x Gigabit LAN ports, with 1 port supporting PoE-IN (802.3bt, 90W) and

The MikroTik KNOT LR8G kit is a compact, ready-to-use gateway designed for LoRa applications. It is engineered to provide affordable and reliable connectivity even in remote locations. It supports LTE CAT-M1 and NB2, Blue

The wAP LR9G kit is a rugged, out-of-the-box LoRa® gateway built into MikroTik’s proven wAP form factor. It features: LoRa 915 MHz support Built-in GPS (via MT3337V) Improved Rx sensitivity: up to

The new MiniPCI-e card for LoRaWAN networks from MikroTik delivers a reliable LoRa solution at an even better price. It operates in the 915 MHz frequency range and offers improved RX sensitivity of up to -141 dBm, which increases range an

The package is complete. The product is new but just missing some cable covers - see photo in gallery. MikroTik netPower 15FR is a reverse PoE switch with 16x 100Mbit ethernet ports, two SFP ports,

You wanted a switch that could do more. So we built one that does everything! 16x (+1) Gigabit Ethernet ports (8x with PoE-out), dual 10G uplinks, and a powerful quad-core 2.2 GHz ARM CPU. Powerful enough to replace most small/medium office routers, ~3

Product description prepares.

The CRS812 DDQ is a device designed for connecting network components with high data transfer requirements, supporting speeds of up to 400 Gbps. The unit is powered by a high-performance quad-core ARM AL52400 processor running at

Replacement 250 W hot-swap power supply for the CRS812-8DS-2DQ-2DDQ-RM switch. Can be replaced during operation without turning the device off or restarting it.

A 1 m direct-attach metallic cable for high-speed network connectivity (up to 400 Gb/s) with integrated QSFP-DD modules. Its short length makes it suitable for connecting devices over short distances, for example between racks in s

A 3 m direct-attach metallic cable for high-speed network connectivity (up to 400 Gb/s) with integrated QSFP-DD modules. Its short length makes it suitable for connecting devices over short distances, for example between racks in s

QSFP-DD is optical module for reliable 400 Gbps fiber connections. The transmission can operate over a distance of up to 100 m. The module includes built-in digital diagnostics for optical power, voltage, temperature, laser

The MikroTik CRS418-8P-8G-2S+RM is a modern combination of a switch and router in one compact design, suitable for installation in a 1U rack cabinet or for use as a desktop device. High performance is ensured by a quad-co

The MikroTik GPERx6 CSS606-1G-2Gi-3S+OUT is a robust outdoor switch designed to withstand harsh weather conditions. It offers an IP66 protection rating and an operating temperature range from - 40 °C to + 70 °C. The unit can be eas

The product is complete and the device was used for testing - there are some scratches on chassis, please see photo gallery. Optical Cloud Router Switch CRS510-8XS-2XQ-IN is a suitable 19" rackmount solutio

The new L23UGSR-5HaxD2HaxD is a dual-band WiFi6 upgrade of the popular RB922 DIY router. You can use it to build custom low-cost outdoor access points or CPEs – for your home, office, homelab needs or even to launch your own products, suc

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

The optical-metallic Cloud Router Switch CRS326-4C+20G+2Q+RM with installation in a 19" rack is an ideal solution for building a 2.5 Gbps LAN network. The switch contains 20x 100/1000/2500 Mbps ethernet, 4x combo 2.5 Gbps (LAN) / 10 Gbps

FTC11XG is a 10Gbps fiber-to-metal converter with an implemented switch-chip, SwOS Lite management (VLAN support, LAG, IGMP, SNMP, ACL, traffic shaping...) in outdoor design with IP55 protection. This converter has one Gigabit LAN port wi

SXTsq-mount is a metal, easily positionable holder for all units from the SXTsq series. It is installed on the unit using 4 screws that are included in the package. The holder can be mounted on a vertical or horizontal pipe with a diameter of

Hot-swap 54.5V 10.35A power supply for the CRS320-8P-8B-4S+RM PoE++ switch. The switch comes with a single 600W PSU and an expansion slot for a second PSU that can raise the total power output all the way to 1150 Watts,

The Cloud Router Switch CRS304-4XG-IN is a compact yet highly powerful switch powered by the RouterOS operating system, offering advanced features such as port forwarding, VLAN, MAC address filtering, broadcast storm control, QoS, bandwidth limi

Replacement 500 W power supply for MikroTik CRS328-24P-4S+RM PoE switch.

Replacement 750 W power supply for MikroTik CRS354-48P-4S+2Q+RM PoE switch.

Welcome to the forefront of networking: the future-proof CRS520-4XS-16XQ-RM with extra processing power, 4 GB of DDR4 RAM, and the best price per 100 Gigabit port we’ve seen so far. With 16x 100 Gigabit QSFP28 ports, 4

High-performance dual-band home access point with Wi-Fi 6 technology, designed for advanced users. This latest model is equipped with a powerful quad-core ARM processor running at 2.2 GHz, allowing it to handle increased traffic. With 4x4 MIM

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way