UACC-G5-Dome-Ultra-FM-SB-W in white is designed for mounting UVC-G5-DOME cameras into ceiling panels or walls. With a bracket depth of 88 mm, you can install your camera in a way that minimally disrupts the overall appearance of the interior. Th

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

IR LED light/illuminator with long-range and FloodLight for the UVC-AI-Pro camera. The integrated radar enhances detection accuracy and allows measuring the distance of people up to 20 m and vehicles up to 35 m. The device also features a

Ubiquiti UTP G3 Touch Enterprise is the new generation of VOIP desk phones. The phone is controlled via a 7" display with a resolution of 1280 x 800 HD, which supports Multi-touch technology. For connectivity, there are 2 gigabit L

The ultra-thin Cat6a patch cable with transparent caps is specifically designed for use with switches from the UniFi Pro Max series and is

Well-crafted shelf that fits perfectly into the U-Rack-6U-TL cabinet. The shelf can also be mounted into any standard 19" rack. It has a depth of 250 mm and occupies 1U of

Well-crafted shelf that fits perfectly into the U-Rack-6U-TL cabinet. It has a depth of 230 mm and occupies 1U of rack height. The shelf is made of cold-rolled

Point-to-point (PtP) parabolic antenna that can work effectively in a very wide frequency range from 5.150 to 6.875 GHz. UISP Dish is a directional parabolic antenna with 30dBi gain and a special WaveGuide co

Internal cable reduction from Ethernet to USB-C port, which is used for power supply and data transfer and is intended only for the following products from Ubiquiti:

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

AirFiber 60 XR (AF60-XR) is a 60GHz point-to-point (PtP) device from Ubiquiti with long range up to 15+ km and is ideal for ISPs looking to maximize point-to-point speeds with cost-effective equipment. The unit is also equipped

Plug-and-play high-performance audio module - microphone and speaker in one designed exclusively for the UniFi Protect AI Theta camera with a maximum consumption of 4.5W. The speaker is supplied with a 1m USB-C connecting cable and a

Dream Wall is another in the range of UniFi All-in-one devices. It contains a gateway with a firewall, Wi-Fi 6 access point, NVR and a switch with PoE function. The unit provides a wide range of network connectivity options. It offers

Ubiquiti RocketDish RD-5G31-AC is a 2x2 parabolic antenna suitable for long PtP coupled using Rocket M units. The main benefit compared to the previous model is excellent isolation of the antero-posterior ratio and SNR / noise isolation. A great benefi

Precision Alignment Kit to better attach the antenna. Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance. Applies to the following models airFiber®AF-5G30-S45 PowerBeam ™

The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation 5AC or IsoStation radio, the system gets maximum gain out of the smallest footprint.

The new dualband bullet as the successor to the airMAX series is a universal single-polarised radio unit with N-male connector that directly mounts on the antenna. In addition to the commonly used 5GHz band, the drive also supports the

nHD-cover-Wood-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Wood design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is n

The product has original package, complete accessories and was used on the exhibition. Wave Access Point is a 60GHz point-to-multipoint (PtMP) transmitter unit with built-in 5 GHz backup (

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 0.3m, 3m or 30m variants. The cable is ideal for creating short connections between switches, ro

The UniFi Protect family camera features a 8MP sensor (3840 x 2160px) at 30 fps, a varifocal lens (22x optical zoom), and adaptive IR illumination for night vision up to 100 meters. The camera has a

Device Bridge Pro Sector is a PTMP WiFi 5 access point from the UniFi device family. It operates in the 5 GHz band with a maximum modulation rate of 400 Mbps. The unit features a 90° sector antenna with a gain of 17 dBi and can con

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m or 0.15m variants. The cable is ideal for creating short connections between switches, routers,

1U snap-in inserts with two threads for easy and precise rack installation. The possibility to pair multiple inserts for mounting larger devices.

Shelf for devices that are not intended for rack mounting. Compatible with U-Rack-6U-TL.

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Protected box for Ubiquiti Switch Plus. The box is designed to be used outdoors thanks to IPX6 certified protection, your switch will be safe. It can be attached to a 35 to 60 mm diameter pole.

UACC-Intercom-SAM is a mounting accessory for fixing the UA-Intercom intercom to a surface at an angle of 5° upwards. The holder is made of UV stable polycarbonate.