Optical networks

Huawei QSFP-100G-SR4-eKit is a multi-mode QSFP28 module with a maximum throughput of 100Gbps, 4 channels of 25Gbps, 850nm wavelength and a MPO-8/12 Type B connector for connection up to a distance of 100m. The module

Huawei QSFP-40G-LR4-eKit is a single-mode QSFP+ module with a maximum throughput of 40Gbps, 4 channels, wavelengths 1271nm, 1291nm, 1311nm, 1331nm and two LC connectors for connection up to a distance of 10km. The mod

Huawei QSFP-40G-iSR4-eKit is a multi-mode QSFP+ module with a maximum throughput of 40Gbps, 4 channels of 10Gbps, 850nm wavelength and a MPO-8/12 Type B connector for connection up to a distance of 150m (OM4). The mod

The Huawei OSGXGSC+01 XGS-PON/XG-PON/GPON SFP+ module is designed for slots in Huawei OLT units. It is a C+ class module, terminated with an SC connector with UPC polishing and offering a transmission distance of up to 20km.

The Huawei OSX002003 GPON SFP module is designed for slots in Huawei OLT units. It is a C+ class module, terminated with an SC connector with UPC polishing, offering a transmission distance of up to 60km and supporting asymm

Huawei eKitOptiX F1002-AC-H1 is a powerful enterprise optical gateway designed for reliable, high-speed data transmission in medium and large networks – ideal for hotels, schools, office buildings, and modern enterprise infrastructures.

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The ATB3120-S-8 ADU (Active Distribution Unit) is an active optical device used to connect the main FTTR and the sub FTTR. It provides optical signals and power input for the sub FTTR. The products can be installed in an indoor information box or on a

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

Product description prepares.

Huawei OptiXstar EG8140H5 je inteligentní ONT jednotka s funkcí routeru , navržená pro vysokorychlostní optické připojení v domácnostech i firmách. Zařízení podporuje technologii GPON a zajišťuje vysoký výkon při přenosu hlasu, dat i HD videa. Router n...

The Huawei OptiXstar EN8245X6s-8N is an intelligent ONT router utilizing XGS-PON and Wi-Fi 6 technologies. It provides ultra-broadband access, high performance, and extensive coverage. The device offers 1x 2.5 Gbit and 3x

The Huawei EchoLife WA8021V5 is a wireless router that is perfect for use in combination with ONT units in bridge mode or as a Wi-Fi repeater for an existing Huawei wireless router. With support for the WiFi 5 standard, the router

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density. The MA5801-FL04-H1 is a

The Huawei OptiXstar EG8147X6-10 is an intelligent GPON and Wi Fi routing t ype ONT. It uses the GPON Wi Fi technology to implement ultra broadband access, high performance and wide coverage for users. The high forwarding performance ensures the user e

The EchoLife EG8040H6 is an indoor Optical Network Terminal (ONT). By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The EG8040H6 provides four GE Ethernet ports and features high-p

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Huawei OSX040N01 is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 40km. The LC connectors in the SFP module have UPC polishing.

Huawei 10G SFP+ DAC cable in 1m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

Huawei 10G SFP+ DAC cable in 3m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

The Huawei active optical cable SFP-10G-AOC10M of Multi Mode type is used for direct connection of two SFP+ ports with a line speed of 10 Gbps. With a length of 10m and a bend radius of 30mm, it is suitable for connecting a pair of

Huawei SFP-10G-ZR is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 80km. The LC connectors in the SFP module have UPC polishing.