Optical networks

Masterlan optical outdoor patch cord suitable for outdoor installations, for example connecting a wireless link that has an optical port and a data switch. The cable sheath is made of high-quality UV-stable material resistant to UV radiation. In

The Huawei EchoLife WA8021V5 is a wireless router that is perfect for use in combination with ONT units in bridge mode or as a Wi-Fi repeater for an existing Huawei wireless router. With support for the WiFi 5 standard, the router

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 0.3m, 3m or 30m variants. The cable is ideal for creating short connections between switches, ro

Maxlink ML-S31D-20-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors i

FTC21 is an optical-metallic converter equipped with a switch chip, SwOS Lite management (supporting VLAN, LAG, IGMP, SNMP, ACL, traffic shaping, etc.), in an outdoor enclosure with IP55 protection. This converter features 2x Gigabit LAN

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

Huawei SFP+STACK-CU0M5 is dedicated stack copper cable with length of 0,5m equipped with SFP+ connectors, which is used for device stacking. Stacking using stack cables removes the need of configurations. Bend radius of t

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

Masterlan outdoor armoured optical fiber patch cord is suitable for outdoor installation due to his stiffness and resistance against the bad weather conditions. For example, wireless outdoor backhaul, which has optical port to data cabinet. Oute

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 20 m long but is also available in other variants. The cable i

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 5 m long but is also available in other variants. The cable is

Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reac

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan pull-out optical distribution frame (ODF) with the height of 1U into 19" rack, black color. It is suitable for 12 SC simplex or 12 LC duplex connectors. ODF includes splice protective tray. It is delivered without cable g

UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFibe

UF-SPLITTER extends the range of Ubiquiti products for GPON solutions. PLC optical splitters are a key building block for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection att

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Dry, dust-free wipes are designed for cleaning optical fibers and cables. They can be used either dry or moistened with isopropyl alcohol. The package contains 280 pieces, and the dimensions of the wipes are 11 x 21 cm.

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

UFiber GPON SFP modul with PN: UF-GP-C+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

Masterlan pull-out optical distribution frame (ODF) with the height of 2U into 19" rack, black color. It is suitable for 48 SC simplex or 48 LC duplex connectors. ODF includes splice protective tray. It is delivered without cable g

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 3 m.

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cabl

The optic pigtail is used to terminate optic cables whether in an optic cassette or in a distribution box by optical fiber splicing, or to connect fibers using mechanical gel connectors and non-gel connectors. Fiber type G.652.D . Opt