_

MikroTik netPower Lite 7R is a reverse PoE switch with 8x Gigabit ethernet ports, two SFP ports, DC power connector, DC terminal and SwOS operating system. The first 7 LAN ports allow power through PoE IN and 8th port supports PoE out

nRayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY. *Scope is not included.

MikroTik Cloud Smart Switch CSS610-8G-2S+IN is managable, 8-ports Gigabit switch with two SFP+ slots, completely silent fanless and kit for attach to 19" data cabinet. It also includes a specially designed operating system for fast switch

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

Professional high-frequency SMASMA cable from MikroTik designed for use in the LTE industry, for example for connecting LTE CPE unit and an LTE antenna. The 1m cable is terminated with two SMA male connectors. For better protection agains

XS+31LC10D is a singlemode SFP / SFP+ / SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with, wavelength of 1310nm and two LC connectors for connection up to a distance of 10km

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supp

You can’t buy safety, but you can buy an RBGESP surge protector and keep your setup safe. RBGESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would

mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the include

Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28.

RB5009 is a brand new line of RouterBOARDs that comes with passive cooling, innovative to futuristic design and high performance (60-90% higher than RB4011) which is due to a 64bit ARM processor architecture with a clock

CCR2004-16G-2S+ is a 19" rack router from the new line of CCR routers, which comes with the highest ratio power per 1 core of all CCRs, which is the most important aspect for more demanding operations based on processing per-connectio

GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on

Outdoor AC/DC power supply in a durable metal chassis with output voltage 26 V, max. output current 9.4 A, total power 250 W suitable for a series of netPower products from MikroTik. The chassis is IP67 certified with extra protec

Outdoor AC/DC power supply in a durable metal chassis with output voltage 53 V, max. output current 4.7 A, total power 250 W suitable for a series of netPower products from MikroTik. The chassis is IP67 certified with extra protec

With this kit, it is possible to mount 1, 2, 3 or up to 4 MikroTik devices in a single 1U with a size of 19". It is above all a perfect use of space which is not never enough in the rack The K-79 gull ears are compatible only

No need to buy several antennas for your Internet-of-things setups – just grab the new HGO-LTE-W antenna that can handle an impressive frequency spectrum 699MHz – 3,8GHz. That’s right – you can use the same antenna for LTE, CAT-M/NB and LoRa con

cAP XL ac is a design ceiling extra powerful Access Point from MikroTik with support for WiFi standards 802.11a / b / g / n / ac with modulation speeds 300 Mbps (2.4 GHz) + 866 Mbps (5 GHz). The AP has been designed to blend in wit

Bluetooth tags play a huge role in IoT setups, where Bluetooth is used to broadcast the data over short distances. You can use these small devices for proximity-based tracking of various objects. For example, if you have a KNOT gateway in

This version of our BLE tags comes completely sealed, cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words, this tag is dust-tight – nothing gets in, and it is fully protected against close-ran

CRS310-1G-5S-4S + OUT or netFiber 9 is an outdoor optical switch router without a fan, with IP54 certification and a full-fledged RouterOS operating system with L5 license but and SwOS thanks to Dual boot. The switch contains 4x SF

A very elegant metal and easily mountable mounting frame from MikroTik, size 19" with height 10U is suitable for laboratory tables, exhibitions or demonstrations. It is not new and revolutionary product, it is more of a trifle that ca

LoRa omnidirectional antenna with 6.5dBi gain for the 824 - 960MHz band with one SMA female connector and IP66 protection. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole with a

Thanks to its very strong configuration, it is the perfect device for professionals in busy locations. There is 4x SFP+ with speed 1/10 Gbps and 13x 10 / 100 / 1000Mbps ethernet, console port type RJ45, 4 fans

wAP LoRa2 is a complete out-of-the-box solution for use as a gateway to a LoRaWAN network. The device includes a pre-installed R11e-LR2 module for forwarding UDP packets to any public or private LoRa server, 1 RJ45 Ethernet port

Thanks to the miniPCIe card R11e-LR2, you can connect any MikroTik device to the LoRa network that has a slot for placing a miniPCI-e card. The card supports 4 different Rx channels from the 2.4 GHz frequency band (2403 MHz,

2.4GHz LoRa omnidirectional antenna with 8 dBi gain for the 2400 - 2500 MHz band with one SMA female connector and 55cm height. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole wi

CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point, the other one will take over. Then you can use this kit to replace the old power supply – and you don’t even have t

CCR2004-1G-2XS-PCIe is a very smart and standalone router with RouterOS installed with L6 license and powered by your server or computer with its own computing CPU 1.5GHz clock and 4 cores for firewall, access control for home multimedia and file serve