Accessories

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Compact beacon enables localization and automated inventory management within 300 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring heat-sensitive goods within 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Robust wireless sensor automatically detects magnetic contact loss or valves opening within 500 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz

Bluetooth magnetic sensors are small signal transmitters with configurable signal strength and time intervals for sending data. The sensor uses advanced Bluetooth 4.0 LE technology for long-distance data acquisition and can operate for up to 2.5 years

The GDS3710 is an HD Video Door System that tracks, manages and records access to any physical building while also serving as an IP surveillance camera and IP intercom. Key feat

LTE Antenna Teltonika PR1KCL28 - SMA. Combo mobile / GNSS roof antenna with IP67 protection, which includes 4x LTE antenna cables and one GPS. Interface: 1× RG174 (GNSS), 4× RG174 (LTE MIMO).

Teltonika Bat120 is a small UPS that only works with DC voltage and hides a small 2300 mAh battery (17 Wh) for bridging short outages for Teltonika Facility with 4-pin connector. On the one hand, the input and output

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

Teltonika PR1KC640 5G combo MIMO mobile/GNSS/Wi-Fi roof SMA antenna. Comes with 4x SMA (5G), SMA (GNSS), 2 x SMA (WiFi). Antenna is compatible with RUTX50 and TRB500. Operation frequencies: 5G: 617 - 960, 1710 - 2690,

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

Teltonika PR5MEC26 Rack mounting KIT is produced for one product - Teltonika RUTXR1. Technical data Mounting type: 1U Rack mounting Material: Copper - Nickel Silver Alloy C7521

Teltonika PR5MEC19 SIM Card Adapter Kit is suitable for every Teltonika device with SIM card slot. Technical Data Cardboard material: Kraft eco - friendly SIM needle material: Stainless steel

Teltonika PR4IO17K I/0 2x8pin connector Technical Data Insulation material: PA66 Contact material: Copper alloy Contact finishing: Tin-plated Wire cross section: 0.2 –

Teltonika PR5MEC15 Connectors set for devices RUT906, RUT955 and RUT956. Technical data: Voltage rating: 300 V Current rating: 8 A Withstand voltage: 1600 V/1min

Teltonika PR3P2EU3 EU power supply is for RUTX12DUAL and RUTX14. Technical Data Input frequency: 50 / 60 Hz Input current: 0.8 A Input connector: EU (Type C)

Teltonika PR320EUA is power supply with power of 250 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data Input frequency: 50 / 60 Hz Input current: 3,9

Teltonika PR3PREU6 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . Technical data Input

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

Surface mounting kit PR5MEC12, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

LTE antenna with 2.5dBi gain and two 3m cables terminated with SMA Male connectors for 698-960 MHz and 1710-2690 MHz bands. The antenna is suitable not only for all Teltonika routers that are equipped with SMA connectors for connecting an exter

Combo antenna with a total of five 3m cables, terminated with 3x SMA Male and 2x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated with

Combo antenna with a total of three 3m cables, terminated with 2x SMA Male and 1x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated wit