Maxlink ML-S5531-20-H3C is a 1.25G SFP WDM module with a Tx 1550 / Rx 1310 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S3155-20-H3C is a 1.25G SFP WDM module with a Tx 1310 / Rx 1550 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S+2733-10-H3C is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-H3C is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S31D-20-HPE is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors i

Maxlink ML-S31D-3-HPE je 1.25G SFP modul s 1310nm vlnovou délkou, dvěmi LC konektory a maximální vzdáleností 3km po singlemode optickém vlákně. SFP modul podporuje monitoring (DDM). LC konektory v SFP modulu mají broušení typu UPC. HPE kompatibilita; M...

Maxlink ML-S+31D-10-HPE is a 10G SFP+ module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM). The LC connectors

Maxlink ML-S5531-20-HPE is a 1.25G SFP WDM module with a Tx 1550 / Rx 1310 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S3155-20-HPE is a 1.25G SFP WDM module with a Tx 1310 / Rx 1550 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S+2733-10-HPE is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-HPE is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

ML-S+31D-40 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 40km. Module is "cisco compatible", so it is compatible with almost all active devices.

ML-S+31Dout-40 is a singlemode 10G SFP+ module with a wavelength of 1310 nm and two LC connectors for connections up to 40 km. Module is "cisco compatible" and is compatible with almost all active devices. The LC connecto

ML-SFP-RJ45-10G-HPE is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m (up to 30m for 10G link).

MaxLink PI60-10G is a high-quality 10-Gigabit PoE injector with a single output PoE port for powering devices that support 802.3af/at standards with a maximum power consumption of up to 60W. To ensure better distribution of the current load, power is s

MaxLink PI60 2x2 is a dual-port PoE injector designed for indoor use. It provides 55 VDC power for remote PDs through one PoE port or delivers 30W per port for two remote PDs simultaneously. It powers terminal devices that support the IEEE802.3af/at st

The MaxLink PI60 EXT 1x4 is a Gigabit PoE extender equipped with 1x input LAN port supporting PoE-IN and 4x output PoE-OUT ports supporting 802.3af/at. The total PoE-OUT budget of the extender is 65W. To power the extender via the PoE-IN port, y

MaxLink PI60 EXT 1x2 is an industrial PoE extender with three 10/100/1000 Mbps ports, 1x PoE-in port supporting 802.3bt/PoE++ with a power output of 60W or higher, up to a maximum of 95W and 2x PoE-out ports providing up to 30W each with

A spacer that enables the use of the MikroTik L11UG-5HaxD routerboard with the RF elements TPA-RBC aluminum mounting box equipped with TwistPort. The spacer is made of plastic using 3D printing and is designed not to obstruct the cooling of the routerb

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

POE-PAN4-GB-AF/A is a Gigabit active PoE injector that is suitable for powering up to 4 devices, such as IP cameras, VoIP or other devices with support for 802.3af/at standards with a maximum power consumption of 30 W. Ethernet por

MaxLink plastic 1U rackmount box made on a 3D printer is designed for Raspberry Pi 2B / 3B / 3B+. Case is made of 2 parts of PETG material - bottom with rackmount ear and top part. The dimensions of the box itself are 62 x 91 x 24 mm.

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 0,2m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low atte

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 0,3m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low atte

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 0,5m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low atte

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 1m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low attenu

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 2m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low attenu

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 3m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low attenu

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 4m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low attenu

Professional high-frequency cable designed for the frequency range 0 to 6 GHz. The cable with a length of 5m is terminated with crimped connectors, SMA female on one side and SMA female on the other. Due to low attenu