GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on

Outdoor AC/DC power supply in a durable metal chassis with output voltage 53 V, max. output current 4.7 A, total power 250 W suitable for a series of netPower products from MikroTik. The chassis is IP67 certified with extra protec

No need to buy several antennas for your Internet-of-things setups – just grab the new HGO-LTE-W antenna that can handle an impressive frequency spectrum 699MHz – 3,8GHz. That’s right – you can use the same antenna for LTE, CAT-M/NB and LoRa con

CRS310-1G-5S-4S + OUT or netFiber 9 is an outdoor optical switch router without a fan, with IP54 certification and a full-fledged RouterOS operating system with L5 license but and SwOS thanks to Dual boot. The switch contains 4x SF

A very elegant metal and easily mountable mounting frame from MikroTik, size 19" with height 10U is suitable for laboratory tables, exhibitions or demonstrations. It is not new and revolutionary product, it is more of a trifle that ca

LoRa omnidirectional antenna with 6.5dBi gain for the 824 - 960MHz band with one SMA female connector and IP66 protection. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole with a

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses LoRa (863 - 870 MHz), Narrow Band and CAT-M technology. Because of the low cost, low band

wAP LoRa2 is a complete out-of-the-box solution for use as a gateway to a LoRaWAN network. The device includes a pre-installed R11e-LR2 module for forwarding UDP packets to any public or private LoRa server, 1 RJ45 Ethernet port

Thanks to the miniPCIe card R11e-LR2, you can connect any MikroTik device to the LoRa network that has a slot for placing a miniPCI-e card. The card supports 4 different Rx channels from the 2.4 GHz frequency band (2403 MHz,

2.4GHz LoRa omnidirectional antenna with 8 dBi gain for the 2400 - 2500 MHz band with one SMA female connector and 55cm height. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole wi

CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point, the other one will take over. Then you can use this kit to replace the old power supply – and you don’t even have t

CCR2004-1G-2XS-PCIe is a very smart and standalone router with RouterOS installed with L6 license and powered by your server or computer with its own computing CPU 1.5GHz clock and 4 cores for firewall, access control for home multimedia and file serve

Be prepared for the unexpected with the backup hot-swappable fans for our newest devices, such as the flagship CCR2216! If your fans go out of order at some point, you can swap them without unnecessary downtime, as there is no need to turn the router o

An advanced pole/mast mount adapter for our LDF series – for extra ease of use and versatility. There are two standard mounting options and additional QMP compatibility for mounting LDF on a wall. The adapter offers extra durability due to its unique p

Chateau 5G kit is a Dual-band 2.4/5GHz home wifi router with 5x Gigabit LAN ports and LTE modem category 20 including one USB port. Thus, the user can simultaneously use the 2.4GHz channel for associated mobile wireless devices and have the 5GHz

XQ+31LC02D is a Singlemode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels, wavelengths 1271nm, 1291nm, 1311nm, 1331nm and two LC connectors for connections up to a distance of 2 km. The module

XQ+85MP01D is a Multimode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels of 25 Gbps, one 12-fiber MPO connector for connection up to a distance of 100 m. The module is compatible with all active elements from M

XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, conne

Chateau LTE18 ax is a Dual Band 2.4/5GHz Wi-Fi 6 router for home or small businesses with (4) Gigabit LAN + (1) 2.5-Gigabit ports , LTE18 modem, one USB port, L4 license and extra fast 4-core ARM 1800MHz CPU, 128MB i

LoRa omnidirectional antenna with 6.5 dBi gain for the frequency band 900 to 928 MHz with one SMA female connector and IP66 protection. The package includes a removable 1m long pigtail with SMA male

KNOT is a truly universal device with a wide range of connection options and support for protocols and interfaces. It is an IoT Gateway that uses LoRa technology (902 - 928 MHz) but also Narrow Band and CAT-M b>, which a

Rackmount kit RMK-2/10 allows the installation of two smaller MikroTik devices with a width of 200mm in traditional 19 inch data cabinets. Alternatively, you can permanently remove the longer part from both brackets and install only o

Outdoor 4-port QSFP28 fanless switch with fins on the back and routing options offers Gigabit Ethernet for management or PoE IN power supply (43 to 57 V DC or 802.3 bt), 4 optical QSFP28 ports with speed 1/10/25/40 a

Outdoor 4-port SFP+ switch without fan and with fins on the back with routing option offers Gigabit Ethernet for management or PoE IN power supply, 4 optical SFP+ ports with speed 1/10 Gbps, console RJ45 port, DC con

XQ+31LC10D is a Singlemode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels, wavelengths 1296 nm, 1300 nm, 1305 nm, 1309 nm and with two LC connectors for connection up to a distance of 10 km. T

The CME Gateway is a rugged and affordable CAT-M LTE modem designed for connecting sensors and IoT devices to the mobile network. The modem provide LTE Cat NB2 and LTE Cat M1 extremely efficient, low-cost, low-bandwidth mobile internet co

The optical-metallic Cloud Router Switch CRS326-4C+20G+2Q+RM with installation in a 19" rack is an ideal solution for building a 2.5 Gbps LAN network. The switch contains 20x 100/1000/2500 Mbps ethernet, 4x combo 2.5 Gbps (LAN) / 10 Gbps

FTC11XG is a 10Gbps fiber-to-metal converter with an implemented switch-chip, SwOS Lite management (VLAN support, LAG, IGMP, SNMP, ACL, traffic shaping...) in outdoor design with IP55 protection. This converter has one Gigabit LAN port with P

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

The new L23UGSR-5HaxD2HaxD is a dual-band WiFi6 upgrade of the popular RB922 DIY router. You can use it to build custom low-cost outdoor access points or CPEs – for your home, office, homelab needs or even to launch your own products, suc