Optical networks

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Teltonika PR4JR20K is a Gigabit cooper RJ45 transceiver. The module has a range of 100m.

Teltonika PR4LC21K is a set of single-mode 1G SFP WDM modules for data transmission using a single fiber with one LC connector. The wavelength (Tx and Rx) of these modules is 1310 and 1550nm, making them suitable for connections up to 20km

Teltonika PR4DU22K is a 1.25G SFP module with an 850nm wavelength, two LC connectors, and a maximum distance of 550m over multimode optical fiber.

Huawei eKitOptiX F1002-AC-H1 is a powerful enterprise optical gateway designed for reliable, high-speed data transmission in medium and large networks – ideal for hotels, schools, office buildings, and modern enterprise infrastructures.

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The ATB3120-S-8 ADU (Active Distribution Unit) is an active optical device used to connect the main FTTR and the sub FTTR. It provides optical signals and power input for the sub FTTR. The products can be installed in an indoor information box or on a

Product description prepares.

Huawei FIK02 is an installation tool designed for use with FTTR optical self-adhesive cable. Its construction allows for consistent pressure to be applied along the entire cable path, ensuring better adhesion of the cable to various surfaces.

Product description prepares.

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m, 3m or 0.15m variants. The cable is ideal for creating short connections between switches, rout

The Omada Optical Networking Solution delivers enterprise-grade gigabit passive optical networking. It seamlessly integrates essential components such as Omada switches, gateways, OLTs (Optical Line Terminals), and ONUs (Optical Network Units)—perfect

The Omada Optical Networking Solution delivers enterprise-grade gigabit passive optical networking. It seamlessly integrates essential components such as Omada switches, gateways, OLTs (Optical Line Terminals), and ONUs (Optical Network Units)—perfect

MC212CS-20 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 1000Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100/1000 Mbps speed. The conv

MC211CS-20 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 1000Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100/1000 Mbps speed. The conv

Masterlan DROPX is fiber optic drop cable suitable for both indoor and outdoor use. Used fibers are high quality Corning (G.657.A2) with perfect flexibility. Aramid yarn serves as strength and protective member. The Cable is completed with LSZH and UV

TP-LINK´s ISM321A-20 adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 20Km with TP-LINK´s Routers, Switche

TP-LINK´s ISM321A-20 adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 20Km with TP-LINK´s Routers, Switche

(8) SFP XGSPON&GPON Combo ports, (2) 100G QSFP28 uplink ports, (2) 25G SFP28 uplink ports, RJ45 Console port, Gigabit RJ45 Manage port, Hot-swap redundancy power, 2 AC or 2 DC or AC+DC power input. Key features (8) PON Por

XZ000-G6 features a gigabit Ethernet LAN port that utilizes XPON technology, delivering transmission speeds of up to 1 Gbps for high-speed internet access and a flawless streaming experience—ideal for FTTH (Fiber to the Home) applications.

Ubiquiti UACC-OM-SFP10-1450 is single-mode module type CWDM with a transmission speed of up to 10 Gbps, wavelengths of 1450 nm and is compatible with SFP and SFP+ interfaces. The module is equipped with two LC connectors an

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2 mm. The ferrule polishing is in UPC (Ultra Physical Co

The Komshine QX43-S1 is a compact universal measuring tool at an unbeatable price. You always have all the equipment you need at your fingertips - the ideal addition for any technician on the road. It supports FC, ST and SC optical connec

FTTHBOX162P is a wall-mounted, outdoor box with IP65 protection for termination/connection of optical cable in the end entrance during the construction of FTTH networks. The box door can be secured with two plastic handles and a lock.

The cleaning pen for 2.5mm ferrules is compatible with SC/FC/ST/E2000 connectors, regardless of the polishing type (APC/UPC). Simply place the tool onto the ferrule and press to clean its surface. The pen can just as easily be used to clean a connector

The cleaning pen for 1.25mm ferrules is compatible with LC connectors, regardless of the polishing type (APC/UPC). Simply place the tool onto the ferrule and press to clean its surface. The pen can just as easily be used to clean a connector already in

Dry, dust-free wipes are designed for cleaning optical fibers and cables. They can be used either dry or moistened with isopropyl alcohol. The package contains 280 pieces, and the dimensions of the wipes are 11 x 21 cm.