Optical networks

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2

Sporting a sleek industrial design, the UFiber WiFi is a robust, high-performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. *Router function will be supported in future firmware. Versatile Pow

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switche

The UFiber WiFi6 GPON CPE (UF WiFi6) is a point-to-multipoint WiFi 6 device that creates high-speed GPON connections capable of reaching a 2.4 Gbps downstream rate and 1.2 Gbps upstream rate. The UF WiFi6 has (4) GbE RJ45 LAN ports and (1) GPON WAN port t

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

The active Multi Mode optical cable is used for direct connection of two SFP+ ports with a link speed of 10 Gbps. This ultra-thin (3mm) optical cable is 10 m long but is also available in other variants. The cable is

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

TL-FC311A-2 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 1000Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100/1000 Mbps speed. The con

The S-55DLC80D is a singlemode Gigabit SFP module with a 1550nm wavelength, two LC connectors and maximum distance up to 80km. The module iscompatible with all MikroTik products, that have SFP or SFP+ cages and other cisco compliant devices.

UF-MM-10G is multimode 10G SFP+ module with 2 LC connectors. Wave length is 850nm and it is suitable for distances up to 300m. Module is compatible with all Ubiquiti products which contain SFP+ ports. Package contains 20 pieces.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2

Masterlan duplex optic fibre coupler for LC connectors with UPC endface polishing, multimode OM4. It is used to connect, for example, two optic fibre patch cords. Also compatible with OM2/3.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.657.A2. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 1.5

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

The Huawei EchoLife WA8021V5 is a wireless router that is perfect for use in combination with ONT units in bridge mode or as a Wi-Fi repeater for an existing Huawei wireless router. With support for the WiFi 5 standard, the router

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

The UACC-OM-SFP28-LR is an optical module that operates at speeds up to 25 Gbps. It operates in Single-mode and guarantees a range of up to 10 km Key features Transfer speed up to 25 Gb/s Range up to 10

We are releasing new direct attach cables that support not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way

ML-S+31Dout-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices. The advantage of this pro

MaxLink 10G SFP+ Active optic cable is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables). The high quality A

MaxLink 25G SFP28 DAC cable, passive is a fast and cheap solution for easy connection of two network active switch/router elements at 1/10/25 Gbps without the need to purchase separate modules or other accessories (for example,

Masterlan optic splice tray with cover is suitable for up to 24 splices. Splice trays can be stacked.

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cabl

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

PLC optical splitters are most important things for building FTTx network with P2MP type (Point to Multi-Point). Our offering splitters have very low loss and high return loss. Compact size provide very easy install to cabinets and optical patch panels

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan duplex optic fibre coupler for LC connectors with UPC endface polishing, singlemode. without flange. It is used to connect, for example, two optic fibre patch cords.