Optical networks

RTROM01-RTSF-10G is a 10-Gigabit SFP+ metal module with RJ45 connector for a metal cable with a data rate of 1G / 2.5G / 5G / 10 Gbps. The range of the module is 100 m at 1 Gbps, it is only 30 m at 10 Gbps using a Cat 6A cable. The mo

The outdoor FTTH data cabinet with installation in the ground is used to connect optical cables in front of the house with very easy access. The data cabinet allows the connection of up to 72 optical fibers and the termination of several optical

Masterlan outdoor armoured optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet.

Masterlan outdoor armoured optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet.

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

Masterlan duplex optic fibre coupler for LC connectors with UPC endface polishing, singlemode. without flange. It is used to connect, for example, two optic fibre patch cords.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m or 0.15m variants. The cable is ideal for creating short connections between switches, routers,

Masterlan optical outdoor patch cord suitable for outdoor installations such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are two

Masterlan optical outdoor patch cord suitable for outdoor installations such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are two

Masterlan optical outdoor patch cord suitable for outdoor installations such as connecting a backhaul unit with an optical port and a data cabinet. The cable sheath is made from high-quality UV resistant material. Inside the cable, there are two

ML-S31D-out-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 3km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The Industrial version of the SFP module differs from the normal one wi

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A1

Huawei FIK01 is an installation tool for working with transparent FTTR cable that is equipped with hot melt adhesive. The tool is used to activate the hot melt adhesive and for the primary fixation of the optical cable to the surface. The packag

The FTK01 kit includes FTTR fiber termination tools (optical cable stripper, coating stripper, and fiber cutter) and is designed to be used with a field-mountable connector (FMC2105). This kit does not require special crimping tool

FTC21 is an optical-metallic converter equipped with a switch chip, SwOS Lite management (supporting VLAN, LAG, IGMP, SNMP, ACL, traffic shaping, etc.), in an outdoor enclosure with IP55 protection. This converter features 2x Gigabit LAN

The MC420L is a media converter designed for conversion between optical and metallic fibers. It supports IEEE 802.3ae (10GBASE-SR/LR) standards for multimode and singlemode optical fibers using an SFP+ module, as well as IEEE 802.3an (10GBASE-T) for tr

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

The optical fiber visual fault locator (VFL) with a power output of 10mW emits a visible red laser beam with a wavelength of 650nm. The device can emit either a continuous beam (CW mode) or a pulsed beam (GLINT mode). When the beam encounters an obstac

Masterlan "@" anchor is built to fully respect the minimum bend radius of the optic fibre cable. Thanks to this, zero attenuation during tension is ensured. The attenuation reaches low values. There is no deformation of the optic fibre cable or

Maxlink ML-S+31D-10-H3C is a 10G SFP+ module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP+ module supports monitoring (DDM). The LC connectors

UV-resistant enclosure, designed for pole or wall mounting, with a removable reel for organization and reduced physical strain on fiber optic cables.

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, conne

UISP-FIBER-XG is a CPE ONU unit for XGS/XG-PON solutions. The device itself serves to convert optical GPON to metallic LAN and only supports Bridge mode, not Router mode. For connection to the XGS/XG-PON network, it uses 1x SC connector with

UISP-FIBER-OLT-XGS offers 8x10Gb/s XGS/XG-PON ports and supports up to 256 clients per port, 2048 clients overall. There are 4x SFP28 uplink ports with speeds up to 25Gb/s. The OLT supports redundant power supply.

Masterlan optical outdoor patch cord suitable for outdoor installations, such as connecting a wireless backhoul with an optical port and data cabinet. The cable outer sheath is made of high-quality UV-stable material. Inside the cable are two ar

Masterlan duplex optic fibre coupler for SC connectors with APC endface polishing, singlemode, without flange. It is used to connect, for example, two optic fibre patch cords.

Masterlan optical outdoor patch cord suitable for outdoor installations, such as connecting a wireless backhoul with an optical port and data cabinet. The cable outer sheath is made of high-quality UV-stable material. Inside the cable are two ar