SFP optical modules

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requireme

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

ML-S31D-out-3 is 1.25G SFP module with wave length 1310nm, 2 LC connectors for maximal distance 20km with singlemode fiber. SFP module supports DDM - digital diagnostics monitoring. The Industrial version of the SFP module differs from the normal one w

ML-SFP-RJ45-10G-H3C is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m (up to 30m for 10G link).

TP-LINK´s TL-SM321A-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321A-2 uses an integrated LC Bi-Directional optical interface connector and the data link

TP-LINK´s TL-SM321B-2 is developed in accordance with the Small Form Pluggable Multi-Source Agreement (SFP-MSA). As a WDM Bi-Directional optical transceiver, TL-SM321B-2 uses an integrated LC Bi-Directional optical interface connector and the data link

TL-SM331T is a universal Gigabit SFP metal module with RJ45 connector for metal cable with a data rate of 10/100/1000 Mbps. The range of the module is up to 100m, it has a durable metal chassis, which helps with good heat dissipation.

TL-SM5310-T is a universal 10-Gigabit SFP+ metallic module of the TP-Link brand with an RJ45 connector for a metallic cable with the option of data rate 100M/1G/10 Gbps. The range of the module is 100 m at speeds from 100 M to

Maxlink ML-S+2733-10-HPE is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-HPE is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

ML-S5531-out-20 is a 1.25G WDM SFP module with wavelengths Tx1550/Rx1310nm, one LC connector and a maximum distance 20km over single-mode optical fiber. SFP module supports DDM - digital diagnostics monitoring. The industrial version of the SFP module

Maxlink ML-S+2733-10-H3C is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-H3C is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S5531-20-H3C is a 1.25G SFP WDM module with a Tx 1550 / Rx 1310 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Maxlink ML-S3155-20-H3C is a 1.25G SFP WDM module with a Tx 1310 / Rx 1550 wavelength, a single LC connector, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM).

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Grandstream Network offers a wide variety of fiber modules. All of them are hot-pluggable small-form factor transceiver modules integrated with the high sensitivity PIN receiver and signal conditioner for 1.25/10 Gigabit Ethernet applic

Teltonika PR4LC21K is a set of single-mode 1G SFP WDM modules for data transmission using a single fiber with one LC connector. The wavelength (Tx and Rx) of these modules is 1310 and 1550nm, making them suitable for connections up to 20km

Teltonika PR4DU22K is a 1.25G SFP module with an 850nm wavelength, two LC connectors, and a maximum distance of 550m over multimode optical fiber.

Maxlink ML-S31D-20-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors i

Maxlink ML-S31D-3-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 3km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors in

The Huawei SFP-GE-LX-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 10km. The LC connectors in the SFP module have UPC polishing.

The Huawei eSFP-GE-SX-MM850 is a multi-mode 1.25G SFP module with a wavelength of 850nm and two LC connectors for connections up to a distance of 0,55km. The LC connectors in the SFP module have UPC polishing.

The Huawei eSFP-FE-LX-SM1310 is a single-mode 100Mbps SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 15km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH40-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 40km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH40 is a single-mode 1.25G SFP module with a wavelength of 1550nm and two LC connectors for connections up to a distance of 40km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH80 is a single-mode 1.25G SFP module with a wavelength of 1550nm and two LC connectors for connections up to a distance of 80km. The LC connectors in the SFP module have UPC polishing.

The ISM311LM series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requireme

The ISM311LS series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requireme

TP-LINK´s ISM321A-20 adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 20Km with TP-LINK´s Routers, Switche