Optical networks

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 0.3m, 3m or 30m variants. The cable is ideal for creating short connections between switches, ro

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Masterlan outdoor optical fiber patch cord is suitable for outdoor installling due to his stiffness and resistance against the bad weather conditions. For example, connecting wireless PTP device, which has optical port and data cabinet. Outer sh

ML-SFP-RJ45-10G-100 is a 10 Gbps SFP+ copper module with an RJ45 connector for copper cables. It is a Cisco-compatible module. The module's reach for 10G transmission is 100m when using Cat6a/Cat7 cables. The module supports link speed only 1

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 5 m long but is also available in other variants. The cable is

WDM SFP modules use only one optical fiber for a two-way connection, thus enabling the connection density to be doubled without the need to change the optical path. The SFP module supports monitoring, or DDM function. The module is co

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 0.5 m but is also available in other variants. The cable is ideal for creating short connections between switc

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Masterlan pull-out optical distribution frame (ODF) with the height of 1U into 19" rack, black color. It is suitable for 12 SC simplex or 12 LC duplex connectors. ODF includes splice protective tray. It is delivered without cable g

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFibe

UF-SPLITTER extends the range of Ubiquiti products for GPON solutions. PLC optical splitters are a key building block for FTTx P2MP (Point to Multi-Point) access networks. The offered splitters have low attenuation and high reflection att

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

Huawei FMC2105-SA is reusable dedicated field mountable SC connector with APC polishing. It can be re-assembled for at least five times. Connector passes the 500-hour accelerated aging test at 75°C/95% RH. The connector is intended for

A 3 m direct-attach metallic cable for high-speed network connectivity (up to 400 Gb/s) with integrated QSFP-DD modules. Its short length makes it suitable for connecting devices over short distances, for example between racks in s

ML-SFP-RJ45-10G-H3C is a 10 Gbps SFP+ metalic module with an RJ45 connector for metalic cable. This is a Cisco compatible module. The module has range up to 100m (up to 30m for 10G link).

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Singlemode 9/125um fibers are made from G.657.A2

FC-SM-200 is 60 meter outdoor single mode optical cable with 6 LC connectors on each side. With this cable you save the cost of renting an optical splicer and related material. The cable is suitable, for example, for galvanic is

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cabl

Masterlan pull-out optical distribution frame (ODF) with the height of 2U into 19" rack, black color. It is suitable for 48 SC simplex or 48 LC duplex connectors. ODF includes splice protective tray. It is delivered without cable g

Masterlan fiber optic pigtail is suitable for fiber termination in a distribution box. The optical fiber is singlemode 9/125 type G.652.D. The pigtail is equipped with one SC connector with APC endface polishing. Cable length 3 m.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 10 m long but is also available in other variants. The cable i

Masterlan optical outdoor patch cord suitable for outdoor installations, for example connecting a wireless link that has an optical port and a data switch. The cable sheath is made of high-quality UV-stable material resistant to UV radiation. In