Powering

Panel integrating 16 passive PoE injectors into a single 19" / 1U panel suitable for powering up to sixteen devices. Professional solution for remote powering of many active elements with passive PoE support.

Panel integrating 16 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support. You will achieve a

POE-BOX8-G is a passive Gigabit PoE injector suitable for powering up to 8 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For poweri

24HPOW is a power adapter with a maximum output voltage of 24V, a current of max. 2.5A and a total power of 60W. The power adapter has a standard 2.1 / 5.5mm connector. The package includes a power cord.

USW-Flex-Mini is a tiny 5-port Gigabit switch managed by UniFi Controller from Ubiquiti in a desktop version with the first port supporting PoE In. PoE IN over Eth1 Its biggest advantage is the Gigabit POE IN on port #1 for

The MHPower MPU-300-12 is designed to protect equipment from outages. Its power output is 300 W and it offers a total of two outlets. This power supply supports only GEL ASGM batteries and conventional flooded batteries, but is not compatible with Li-I

The Ubiquiti POE-48-24W-WH is a grounded PoE injector with a maximum output power of 24 W. It provides one input port for a traditional LAN connection and a second port as a PoE output port. The maximum data transfer rate is 100 Mbps. Key Fe

Ubiquiti Pro Max 48 is a quality switch. It has 16 LAN ports with speeds up to 2.5 Gbps. The other 32 ports have a speed of 1 Gbps. There are also 4 SFP+ ports with speeds up to 10 Gbps. The switch can be configured using UniF

Ubiquiti Switch Plus is a powerful PoE switch designed for both home and office. There are 4 LAN ports with speeds up to 2.5 Gbps and passive 27V PoE output. The optical interface will offer 4 SFP+ ports with speeds up to

POE-BOX4-G is a passive Gigabit PoE injector suitable for powering up to 4 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For poweri

Rozbočovací kabel DC napájení s konektory 2x samec (male) na 1x samice (female). Konektory mají rozměry 2.1/5.5mm a celková délka je 19cm.

The passive PoE extractor is used to separate data and power connector at the end of the cable. Especially suitable for routers, APs and switches without passive POE support. PoE does not supports 802.3af/at specification. Pins 4,5 (-) and 7,

An end-to-end DC connecting cable with one ear on the first side and with socket on the other is ideal for connecting a M6 threaded battery and a voltage converter. The cable is made of a sufficiently dimensioned cable with a cross-section of 4mm2 (cur

Parametr Hodnota Počet zásuvek 1 Funkce přepěťové ochrany Basic Specifikace: 16 A / 4000 W Total rating 18 000 A, 3 x MOV 6 000 A Response time

Maxlink POE-CON-AFAT-24 is an indoor PoE converter that changes active power supply to passive. It converts from input PoE 802.3at (44-56V) to passive 24V. Input: 802.3at (44-56V) Output: 24V, max. 1A

EP-54V-150W-DC is removable power supply (voltage converter) for EdgePower solution. The output power of the power supply is 150W (54V) with a variable input power via DC terminal.

Tata baterie ja vhodná jako náhrada za originální baterii do vaší UPS.

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

Lead battery with voltage 12V and capacity 28Ah. The battery has M5 connectors for connecting device. Battery life is 10 years. The battery is suitable for use with a voltage converter as a backup power supply or as a replacement battery for UPS. If yo

MaxLink PI60-10G is a high-quality 10-Gigabit PoE injector with a single output PoE port for powering devices that support 802.3af/at standards with a maximum power consumption of up to 60W. To ensure better distribution of the current load, power is s

The WK-PS305 is a compact and cost-effective 1Gbps PoE switch, ideal for small to medium-sized surveillance systems or IP networks. It features 4 PoE ports supporting IEEE 802.3af/at (up to 30W per port) and 1 uplink port for connection to the

Ubiquiti Pro Max 24 is a quality switch. It has 8 LAN ports with speeds up to 2.5 Gbps. The other 16 ports have a speed of 1 Gbps. There are also 2 SFP+ ports with speeds up to 10 Gbps. The switch can be configured using UniFi

Alkalické baterie TESLA GOLD 9V (6LR61) - 1ks, blister

±48 V DC telecom Open Frame Power supply with 12 V 8 A output, for use with new “r2” revision of Cloud Core Routers. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for -48 V installations. Compatibility

MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi

MikroTik Cloud Router Switch CRS354-48P-4S+2Q+RM is very powerfull switch with 2x QSFP+, 4x SFP+, 48x Gigabit and one 10/100Mbps metalic port only for management. Switch provides total throughput 168 Gbps and switching capacity 336 Gbps with 235 Mpps f

Power adapter with output voltage 48V DC, maximum current 0.95A, total output power 45,6W and connector 5.5 / 2.1mm. The power source is part of the MikroTik GPEN concept, which provides all the benefits of GPON.

Two-level UPS with UPS function, suitable for backup, Wireles or Security systems for external batteries. Output voltage/current: 27.6/5 + 27.1/0.5 UPS function Built-in PFC - Power Factor Corrector (correcti

UPS MHPower WPU-500 is ideal as a backup power source for a circulation pump, a boiler, or a fireplace stove. Thanks to its pure sine wave output and robust toroidal transformer, it is also suitable for backing up many other device

The MDPower MPU-500-12 serves as a backup power supply during a power outage while providing surge protection. Its power output is 500 W and it offers a total of two outlets. This power supply supports only GEL ASGM batteries and conventional flooded b