Powering

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains (5) Gigabit PoE adapter (5) Power co

CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

MikroTik netPower Lite 7R is a reverse PoE switch with 8x Gigabit ethernet ports, two SFP ports, DC power connector, DC terminal and SwOS operating system. The first 7 LAN ports allow power through PoE IN and 8th port supports PoE out

Lead battery with voltage 12V and capacity 9Ah. The battery has faston 6,3mm connectors for connecting your device. Battery life is 10 years. The battery is suitable for use with a voltage converter as a backup power supply or as a replacement battery

Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 19W and

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains PoE adapter Power cord

Bezdrátové zařízení Cambium Networks využívají PoE (Power over Ethernet) pro dodávání energie a dat. Tento PoE napájecí zdroj má AC a datový vstup, který pak napájí 30V bezdrátovou jednotku. Napájecí zdroj PoE splňuje přísné požadavky na účinnost a pře...

48V 2A 96W power supply, to be used with MikroTik products that support 48V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48V 1.46A 70W), allowing more power per port. Co

Ubiquiti Pro Max 16 is a new L3 switch that offers 4x 2.5 Gbps and 12x 1 Gbps ports. For optical interface connection, there are 2 SFP+ ports achieving speeds up to 10 Gb/s. The switch is powered via a USB-C 5V DC 25W.

N-SW is very simple non managable PoE switch with 4x Gigabit LAN with passive PoE powering. PoE Passthrough PoE In — RJ45 port supports 10/100/1000 E

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 48W and a maximum output current 2A

Ubiquiti USW-Pro-HD-24-PoE is a 24-port PoE switch with L3 functionality. The switch features 22x 2.5Gb and 2x 10Gb ports, all supporting PoE 802.3af/at/bt up to 60W per port. The total PoE budget of the switch is 600W

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

The UniFi Switch USW-Pro-XG-8-PoE is a compact, fully managed L3 PoE switch with a switching capacity of 200 Gbps, (8) 10-Gigabit LAN ports, and two SFP+ (10Gbps) ports. All Ethernet ports support PoE++

The Ubiquiti POE-24 is a grounded PoE injector with a maximum output power of 30 W. It provides one input port for a traditional LAN connection and a second port as a PoE output port. The maximum data transfer rate is 1 Gbps. This device

Original MikroTik power adapter 48POW with EU plug for plugging into a socket, with a standard 5.5 / 2.1mm connector intended for powering, for example, MikroTik devices with input voltage 48V DC. The power adapter h

Adapter from a two-pole terminal block to standard DC jack with size 2.1/5.5mm. Adapter is suitable for powering analog cameras or other devices without PoE technology. Just bring a two line DC cable and simply connect it to the terminal block m

Gigabit L3 PoE switch Ubiquiti EdgeSwitch ES-24-250W in 19" rackmount design with maximum PoE power 250W. Manageable switch with 24 gigabit metallic ports + 2 Gigabit SFP ports and 52Gbps total throughput. Passive 24V and 802.3af/at

Power 9 V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 0.85 A.

Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support. You will achieve a

The RB260GSP is a small SOHO switch, which features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Etherne

High-quality, stabilized PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

A compact, 8-port, Layer 2 GbE PoE switch with versatile mounting options. The switch has 1 PoE in port and 7 PoE out ports with PoE 802.3af/at with max wattage 30W per port. Switch is managed by UniFi network providing central man

The Ubiquiti USW-Pro-Max-48-PoE is a 48-port PoE switch with L3 feature support. It offers 16x 2.5Gb ports, where 8 ports support POE++ up to 60W per port, and an additional 8 ports support POE+ up to 30W per port. Additionally, there are

UniFi Switch Enterprise 8 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 80 Gbps, (8) 2.5-Gigabit LAN ports and two SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out with an

MikroTik OEM power adapter with direct installation in a socket with a standard 4 / 1.7mm connector and output voltage 5V DC. The power adapter has a maximum power 15W and a maximum output current 3A.

The Huawei DC power adapter with 12V output voltage and max current of 2A. The power adapter has a maximum output power of 24W. The adapter is equipped with a standard 5.5 / 2.1mm connector on the output.