Accessories

Mobile SMA Antenna for the bands of 698-960/1710-2690 MHz and 3 dBi max. gain, type of mounting - screw on. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

DIN Rail adapter PR5MEC00 Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Teltonika PR5MEC23 DIN Rail KIT adapter is possible to use almost with all Teltonika products, please see Related products and Datasheet. Technical data Mounting type: 35 mm DIN Rail Material: B

Patch cable PR2LA15B is a part of product line Teltonika - Category 5E. This patch cable is supplied in the UTP option, with 1,5m length and grey color.

Use the PR5MEC22 Surface Clip Holder Kit to provide a stable and secure base for your Teltonika router (RUT200, RUT240, RUT241, RUT260, TRB245, TRB246, TRB255 and TRB256). This holder kit comes with a high-quality surface clip that

LTE antenna with 2.5dBi gain and two 3m cables terminated with SMA Male connectors for 698-960 MHz and 1710-2690 MHz bands. The antenna is suitable not only for all Teltonika routers that are equipped with SMA connectors for connecting an exter

5G Mobile MIMO Antenna Frequency range: 600 ~ 960, 1400 ~ 6000 MHz Polarization: Linear Radiation pattern type: Omni-directional Gain:

Combo antenna with a total of five 3m cables, terminated with 3x SMA Male and 2x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated with

Teltonika 035R-00143 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT 230/240/850/900/950/955 units, or newer. The power adapter has a maximum power of 9W, an output voltage of 9V and a current of 1A.

Teltonika PR3PREU6 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . Technical data Input

Teltonika PR1KC640 5G combo MIMO mobile/GNSS/Wi-Fi roof SMA antenna. Comes with 4x SMA (5G), SMA (GNSS), 2 x SMA (WiFi). Antenna is compatible with RUTX50 and TRB500. Operation frequencies: 5G: 617 - 960, 1710 - 2690,

WiFi magnetic RP-SMA Antenna for the frequency of 2400-2483.5/5150-5905 MHz and 3 dBi max. gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUTX10 and RUTX11.

The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise

Outdoor LTE/Wi-Fi antenna for RUT2xx series routers. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every dir

Teltonika PR1KRT25 bluetooth SMA antenna for the frequency of 2.4-2.5 GHz and 2,5 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for Teltonika devices with bluetooth - please see related products.

WiFi magnetic RP-SMA Antenna for the frequency of 2.4-2.4835 GHz and 2 dBi gain, 1,5m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955.

Bluetooth magnetic sensors are small signal transmitters with configurable signal strength and time intervals for sending data. The sensor uses advanced Bluetooth 4.0 LE technology for long-distance data acquisition and can operate for up to 2.5 years

Autonomous temperature sensor is perfect for monitoring temperature sensitive equipment within 200 meters. To be used with: RUTX11, RUTX12, RUTX10.

Mobile magnetic SMA Antenna for the bands of 699-868MHz, 1850-2690MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - magnetic. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB1

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

LTE Antenna Teltonika PR1KCL28 - SMA. Combo mobile / GNSS roof antenna with IP67 protection, which includes 4x LTE antenna cables and one GPS. Interface: 1× RG174 (GNSS), 4× RG174 (LTE MIMO).

Teltonika PR2VM20M SMA is cable extension with lenght of 2000 mm with SMA connectors (female a male).

Teltonika PR3P2EU3 EU power supply is for RUTX12DUAL and RUTX14. Technical Data Input frequency: 50 / 60 Hz Input current: 0.8 A Input connector: EU (Type C)

Teltonika PR320EUA is power supply with power of 250 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data Input frequency: 50 / 60 Hz Input current: 3,9

Teltonika PR3PWEU3 is power supply with power of 62,4 W. This power supply could be used with Teltonika devices: TSW100 and RUT951 PoE+. Technical data Input frequency: 50 / 60 Hz Input current: 1,5 A

Teltonika PR317EUA is power supply with power of 62 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data

Teltonika PR3PUPS3 is power supply with power of 9 W. This power supply could be used with Teltonika devices - see related products . The package contents 4 input connectors which are very easy to switch. EU (Type C), US (Type A), U

Outdoor LTE & 5G/Wi-Fi/GPS antenna for RUTX50 router. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every

Teltonika PR3PUUS3 is a special power adapter with atypical 4-pin connector designed for Teltonika RUT200/240/241/260/271/300/301/901/906/950/951/955/956/976, TRB140/141/142/145/160/500, TRM500 and TSW110. The power adapter has a maximum power o

Outdoor LTE/Wi-Fi/GPS antenna for RUT9-series routers. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from every d