Accessories

Outdoor LTE/Wi-Fi/GPS/Bluetooth antenna for RUTX11 router. Key features IP67 - Water and dust-resistant for ultimate outdoor reliability OMNIDIRECTIONAL - Designed for reliable signal coverage from eve

Single port Gigabit PoE injector for powering devices. Key features Input frequency - 50 / 60 Hz Input current - 0.5 A PoE output voltage - 52 VDC PoE method - Active

Passive PoE injector (24W) for powering devices. Key features Input frequency - 50 / 60 Hz Input current - 0.8 A PoE output voltage - 24 VDC PoE method - Passive

Teltonika PR3PWEU3 is power supply with power of 65 W. This power supply could be used with Teltonika devices: TSW100 and RUT951 PoE+. Technical data Input frequency: 50 / 60 Hz Input current: 1,5 A

Teltonika PR315PS3 is an universal power adapter with atypical 4-pin connector designed for Teltonika units. The power adapter has a maximum power of 24W, an output voltage of 24V and a current of 1A.

5G Mobile MIMO Antenna Frequency range: 600 ~ 960, 1400 ~ 6000 MHz Polarization: Linear Radiation pattern type: Omni-directional Gain:

Mechanical/Environmental Voltage rating: 250 V Current rating: 4 A Contact resistance: less 10 mOhm Wire range AWG: 24 (0.5 m

Mechanical/Environmental Voltage rating: 48 V AC / 60 V DC Current carrying capacity: 0.5 A Conductor cross section, solid wire: AWG 26/1 - AWG 22/1

Power supply 24V, 15W, mounted directly on the DIN rail. Input voltage 90-264 VAC.

The Teltonika PR1KC540 is a 5G MOBILE antenna featuring (4) SMA male connectors that can be mounted using adhesive or screws. Key features 5G frequencies: 600-960, 1427-2700, 3300-4200, 4400-5000

The Teltonika PR1KCN40 is a combined antenna for 5G mobile networks and GNSS. It features (4) SMA male connectors for connecting to a 5G modem and (1) SMA male connector for GNSS. The antenna can be mounted using adhesive or scr

Teltonika PR318EUA is power supply with power of 130 W. This power supply could be used with Teltonika devices: TSW200, TWS202 and TSW212. Technical data

Teltonika PR5MEC24 TSW1 Rear panel with DIN Rail holder. This panel is compatible with Teltonika TSW100 and TSW101. Technical Data Mounting type: 35 mm DIN rail Dimensions:

Teltonika PR5MEC26 Rack mounting KIT is produced for one product - Teltonika RUTXR1. Technical data Mounting type: 1U Rack mounting Material: Copper - Nickel Silver Alloy C7521

Teltonika PR5MEC19 SIM Card Adapter Kit is suitable for every Teltonika device with SIM card slot. Technical Data Cardboard material: Kraft eco - friendly SIM needle material: Stainless steel

Teltonika PR4IO17K I/0 2x8pin connector Technical Data Insulation material: PA66 Contact material: Copper alloy Contact finishing: Tin-plated Wire cross section: 0.2 –

Teltonika PR5MEC15 Connectors set for devices RUT906, RUT955 and RUT956. Technical data: Voltage rating: 300 V Current rating: 8 A Withstand voltage: 1600 V/1min

Teltonika Bat120 is a small UPS that only works with DC voltage and hides a small 2600 mAh battery (17 Wh) for bridging short outages for Teltonika Facility with 4-pin connector. On the one hand, the input and output

2×3 PIN connector is primary intended for Teltonika products RUT955, RUT956 and TRB145. The connector contains total of 6 holes for cables with a cross-section of 16 to 24 AWG.

AUTOMOTIVE POWER SUPPLY, 9-30VDC, 2A, dedicated for Teltonika products (RUT 230/240/850/900/950/955, RUTX08/09/10/11/, TRB140/141/142/145)

Combo antenna with a total of three 3m cables, terminated with 2x SMA Male and 1x RSMA Male connectors. The unit consists of 3 antennas built in one housing. An antenna for GNSS with a gain of 28dB in the band 1575.42-1610 MHz is terminated wit

Compact plastic DIN Rail adapter (70x25x14,5mm) PR5MEC11, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Surface mounting kit PR5MEC12, Philips Pan Head screw #6-32×3/16, 2pcs for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TRB141/TRB142/TRB145

Wireless motion sensor that detects vibration levels to trigger the alerts or automated commands. To be used with: RUTX11, RUTX12, RUTX10.

Robust wireless sensor automatically detects magnetic contact loss or valves opening within 500 meters radius. To be used with: RUTX11, RUTX12, RUTX10.

Power supply 12V, 20W, mounted directly on the DIN rail. Input voltage 100-240 VAC 50/60 Hz

GNSS ADHESIVE SMA ANTENNA for the band of 1575.42-1602 MHz and 2 dBi gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT955/RUTX09/RUTX11/TRB245

Mobile adhesive SMA Antenna for the bands of 824-960/1710-2170 MHz and 2 dBi max. gain, 3m cable lenght, type of mounting - adhesive. Recommended for RUT230/RUT240/RUT900/RUT950/RUT955/RUTX08/RUTX09/RUTX10/RUTX11/TRM240/TRM250/TRB140/TR

Beacon with battery life reaching up to 18 years, identifies and tracks industrial equipment within a radius of 500 meters. To be used with: RUTX11, RUTX12, RUTX10.

Beacon with battery life reaching up to 5 years, identifies and tracks industrial equipment within a radius of 200 meters. To be used with: RUTX11, RUTX12, RUTX10.