Wireless

Point-to-point (PtP) parabolic antenna that can work effectively in a very wide frequency range from 5.150 to 6.875 GHz. UISP Dish is a directional parabolic antenna with 30dBi gain and a special WaveGuide co

AM-2G15-120 airMAX Sector Antenna is a 15dBi Carrier Class 2x2 MIMO (Dual Polarity) Sector Antenna with 120° beam angle that was designed for 2.4GHz band and for integrate with Rocket M radios (RocketM sold separately).

AM-5G16-120 airMAX Sector Antenna is a 16dBi Carrier Class 2x2 MIMO (Dual Polarity) Sector Antenna with 120° beam angle that was designed for 5GHz band and for integrate with Rocket M radios (RocketM sold separately).

AMO-2G10 is 2x2 MIMO omnidirectional antenna with 10dBi gain, 360°/12° beam angles and is designed for 2.4GHz band. It was designed to seamlessly integrate with Rocket M radio series.

The new dualband bullet in auliminium body as the successor to the airMAX series is a universal single-polarised radio unit with N-male connector that directly mounts on the antenna. In addition to the commonly used 5GHz band, the drive a

The WiFi 6 Extender (U6 Extender) is a portable, plug-and-play WiFi 6 access point that can easily and instantly extend the wireless coverage of your home or office. The U6 Extender can be adapted to your network in minutes and centrally managed using

This plug-and-play 5 GHz wireless bridge enables point-to-point connection to another Bridge device. It features one GbE RJ-45 PoE-Out port to power another device, such as cameras and other devices. The bridge itself is powered through a standa

LiteBeam 5AC-XR is a 2×2 MIMO AC series client station with airMAX TDMA for the 5GHz band. This unit has a higher antenna gain of 29 dBi and a GPS module for time synchronization which is useful whe

The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.

The plastic wall holder is intended for horizontal installation of Access Points from Ubiquiti, specifically for U6-Pro and UAP-AC-PRO. The holder is attached to the wall using two screws and dowels, which are in

The small, elegant yet powerful AP is ideal for businesses and homes. Modern and discreet design allows for placement close to users for optimal performance. In the 5GHz band, it reaches a transmission speed of up to 1.733 Gbit/s and in 2.4GHz

Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Improved Mounting and Surge Protection Featuring enhanced protection against E

Ubiquiti introduces our proprietary INVICTUS™ core communications processing engine. The speed, power, and efficiency of this integrated circuit enhances the performance of the airFiber AF-5/AF-5U. Surpassing conventional wired backhauls, the airFiber®

Launched in 2008, the Bullet™ design helped transform the WISP industry. Its unique design upgrades link performance and reduces deployment complexity. Bullet M is the latest version of the popular Ubiquiti Bullet. Like its predecessor, Bullet M

AM-5G19-120 airMAX Sector Antenna is a 19dBi Carrier Class 2x2 MIMO (Dual Polarity) Sector Antenna with 120° beam angle that was designed for 5GHz band and for integrate with Rocket M radios (RocketM sold separately).

Antennas compatibility list PBE-5AC-620 PBE-M5-620 AF-5G30-S45 RD-5G30-LW Plug and Play Integration Installation is quick and easy – requiring just a single screw.

The compact form factor allows the airFiber X Antennas to be used in various applications, from carrier backhauls between towers to PtP bridging between buildings. AF-5G34-S45 offers 30dBi of gain in a 1050-mm diameter size. The

The compact form factor allows the airFiber X Antennas to be used in various applications, from carrier backhauls between towers to PtP bridging between buildings. AF-5G30-S45 offers 30dBi of gain in a 650-mm diameter size. The

AMO-2G13 is 2x2 MIMO omnidirectional antenna with 13dBi gain, 360°/7° beam angles and is designed for 2.4GHz band. It was designed to seamlessly integrate with Rocket M radio series.

LTU-Rocket is a PtMP AP unit for the 5GHz band with two RSMA female connector for Wireless sector antenna, one SMA female connector for GPS antenna and proprietary LTU wireless technology that is not based on the 802.11 standard protocol can deliver r

LiteBeam 5AC-17-90 GPS is Base Station unit with Gigabit LAN port, integrated 17dBi and sector antenna with 90° beam angle. Unit is compatible only with airMAX AC CPE units and is designed for outdoor usage. Thanks to the

LTU-XR is a PtMP client unit for the 5GHz band with an antenna gain of 29 dBi and LTU's proprietary wireless technology, which is not built on the limited 802.11 standard, which can achieve a real TCP/IP speed of 550 Mbps+ and modulation

Magnetic wall mount for UniFi Express and Gateway Lite devices Package contents Holder Dowels and screws

UniFi Mobile Router is a compact device with wide power options, two LAN ports, WiFi and LTE Cat4 modem. One of the pair of gigabit ethernets also supports the PoE-out function. Power options are via a USB-C connector or a 4-pin

nHD-cover-Wood is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Wood design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not officiall

Magnetic GPS Ubiquiti antenna with SMA male connector and 1m cable lenght.

Dream Wall is another in the range of UniFi All-in-one devices. It contains a gateway with a firewall, Wi-Fi 6 access point, NVR and a switch with PoE function. The unit provides a wide range of network connectivity options. It offers

U6 Enterprise In-Wall is an access point designed for use in office spaces with high coverage density. The universal wall mounting bracket is ready for use with most commonly used wiring boxes worldwide. The 1G/2.5 Gbps

Ubiquiti U7 Pro Wall Paintable Flush Mount is a thoughtfully designed mount that allows you to hide the device directly in the wall. You then attach a cover that can be painted with any color, allowing it to blend seamlessly with any design.

The Ubiquiti U7 Pro Wall Table Stand is an elegant and very light table stand for the Ubiquiti U7 Pro Wall device.