Wireless

Ubiquiti PBE-M2-400 is a powerful completely outdoor unit including 2x 18dBi (2x2 MIMO) antennas for the 2.4GHz band as a PtP or PtMP solution. The unit allows transmission speed up to 300Mbps. Inside PowerBeam is a powerful MIP

The LiteBeamM provides 23dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Featuring the freedom of three-axis alignment, the LiteBeamM fully assembles in seconds – no

Precision Alignment Kit to better attach the antenna. Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance. Applies to the following models airFiber®AF-5G30-S45 PowerBeam ™

The PBE-5AC-400-ISO is a suitable device for PtP connections with a 25dBi antenna gain from the airMAX AC series, which achieves very high transmission speeds and a stable connection even in a noisy environment. The unit is compatible

Ubiquiti PBE-M5-400-ISO is a powerful completely outdoor unit including 2x 25dBi (2x2 MIMO) antennas for the 5GHz band as a PtP solution. The unit allows transmission speed up to 300Mbps. Inside PowerBeam is a powerful MIPS proc

Ubiquiti’s INVICTUS™ custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications. The airFiber X features industry-leading spectral efficiency of up to 17.1 Mbps/MHz, line-rate

Ubiquiti’s INVICTUS™ custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications. The airFiber X features industry-leading spectral efficiency of up to 17.1 Mbps/MHz, line-rate

The compact form factor allows the airFiber X Antennas to be used in various applications, from carrier backhauls between towers to PtP bridging between buildings. AF-2G24-S45 offers 24dBi of gain in a 650-mm diameter size. The

The compact form factor allows the airFiber X Antennas to be used in various applications, from carrier backhauls between towers to PtP bridging between buildings. AF-3G26-S45 offers 26dBi of gain in a 650-mm diameter size. The

LiteBeam LBE-5AC-16-120 is a outdoor basestation with Gigabit LAN port and built-in 16dBi sector antenna with 120° beam angle. The unit is compatible only with other airMAX AC products.

Ubiquiti UniFi AC Pro is an 802.11ac UAP device. It is a 3x3 MIMO 2.4GHz and 5GHz Acess Point with transmission rates up to 1300 + 450 Mbps and supports 802.11a/b/g/n/ac standards. The UAP is designed for offices, hotels, warehouses and

Ubiquiti UniFi AC Pro is an 802.11ac UAP device. It is a 3x3 MIMO 2.4GHz and 5GHz Acess Point with transmission rates up to 1300 + 450 Mbps and supports 802.11a/b/g/n/ac standards. The UAP is designed for offices, hotels, warehouses and

The AP-5AC-90-HD AirPrism sector antenna is the first multi sectoral antenna with 3 independent 2x2 MIMO sector antennas with a 30° radius coverage for the 5GHz band. The total airPrism antenna coverage angle is 90°. This sectoral antenna

Excellent plastic holder designed for places where it is not possible to drill, so thanks to the suction cup it can be mounted from the inside of the window. The bracket is compatible with NBE-5AC-16 and NBE-M5-16.

Precise GPS Synchronization Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links. 4x4 M

Precise GPS Synchronization Using a common GPS timing reference, the airFiber X radios work cohesively to deliver powerful, multi-Gigabit bridging performance for PtP links. 8x8 M

ISO-BEAM-16 is a small anti-interference cap with collar for the NanoBeam M5-16 and NanoBeam 5AC-16 units. This cover reduces unwanted interference from the back and sides. Protects the signal only in the desired area. The interfer

Ubiquiti’s INVICTUS™ custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications. The airFiber X features industry-leading spectral efficiency of up to 17.1 Mbps/MHz, line-rate

AF-11FX-DUP-H is a frequency duplexer for 2x2 MIMO usage with airFiber 11FX-H unit. Duplexer operates in the frequency band 10.940 - 11.200GHz (low channel) and 11.440 - 11.

AF-11FX-DUP-L is a frequency duplexer for 2x2 MIMO usage with airFiber 11FX-L unit. Duplexer operates in the frequency band 10.700 - 10955MHz (low channel) a 11.200 - 11.445

Ubiquiti UniFi AC In-Wall is small and discrete 802.11ac UAP device. It is 2x2 MIMO 2.4G and 2x2 MIMO 5G AP with throughput up to 1167Mbps and supports 802.11a/b/g/n/ac. UAP-AC-IW is designed for offices and hotels. It contains 1 built-in

Ubiquiti UAP-nanoHD is 802.11ac UAP device. It is 2x2 MIMO in 2.4GHz band, 4x4 MU-MIMO in 5GHz band Acess point with modulation speed up to 300 + 1733 supporting 802.11/a/b/g/n/ac/ac-wave2. This UAP is designed for example offices, hotel

UAP-XG is the ideal unit to cover a small area with large numbers of people - such as auditoriums, concert halls, etc. -. The total wireless modulation rate of 800 Mbps + 1733 Mbps will be converted into a cable thanks to a pair of Eth

For ultra high density environments, such as an outdoor music festival, where there are numerous clients in a relatively small space, we recommend the UniFi WiFi BaseStation XG. 802.11ac Wave 2 MU.MIMO (Multi-User, Multiple Input, Multiple Ou

The new dualband bullet in auliminium body as the successor to the airMAX series is a universal single-polarised radio unit with N-male connector that directly mounts on the antenna. In addition to the commonly used 5GHz band, the drive a

UAP-IW-HD is a UniFi MU-MIMO ac Wave2 built-in wall-mounted Access Point. In the 5GHz band, it supports 4x4 MU-MIMO technology with a maximum modulation rate of 1733Mbps. In the 2.4GHz band, a radio with 2x2 MIMO supports mo

NanoHD-RCM-3 is a three-pack of ceiling mounts for UAP nanoHD, U6-Lite, U6-Lite or U6+, thanks to which you can embed your devices in the ceiling. Both packaging (3) ceiling mount

NanoHD-RetroFit-3 is a mounting kit for attaching the UAP-nanoHD unit to the wall or ceiling with the original UAP, UAP-LR mounts. Once mounted, your UAP-nanoHD, U6 Lite or U6+ will blend in with the walls because the Retrofit Mount kit elimina

nHD-cover-Black-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE i

nHD-cover-Camo-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Camo design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is