Optical networks

An integral part of Huawei's all-optical access solution, OptiXstar EG8010Hv6-10 is a bridging-type Optical Network Terminal (ONT) that uses Gigabit Passive Optical Network (GPON) technology to offer ultra-broadband access. With high forw

The Huawei OptiXstar EG8041X6-10 is a GPON ONT Gateway with support for Wi-Fi 6 (802.11 a/b/g/n/ac/ax) and a maximum transmission speed of 2402 Mb/s on 5 GHz and 574 Mb/s on 2.4 GHz. The ONT unit is equipped with four LAN

The EchoLife EG8145V5 is a intelligent routing-type Optical Network Terminal (ONT) in Huawei FTTH solution. By using the GPON technology, ultra-broadband access is provided for home users. The EG8145V5 supports 802.11ac dual-frequency bands and feature

Huawei FMC2105-SA is reusable dedicated field mountable SC connector with APC polishing. It can be re-assembled for at least five times. Connector passes the 500-hour accelerated aging test at 75°C/95% RH. The connector is intended for

The Huawei OptiXstar EN8010Ts-20 is an XGS-PON bridging-type ONT in the Huawei all-optical access solution. It uses the XGS-PON technology to implement ultra-broadband access for users. Auto Port Speeds Auto-adaptive 10000Mbit/s, 50

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Huawei OptiXstar EN8255X6s-8X is an XGS-PON and Wi-Fi 6 routing-type ONT. It uses the XGS-PON and Wi-Fi 6 technologies to implement ultra-broadband access, high performance and wide coverage for users. The high forwarding performan

Huawei FIK01 is an installation tool for working with transparent FTTR cable that is equipped with hot melt adhesive. The tool is used to activate the hot melt adhesive and for the primary fixation of the optical cable to the surface. The packag

The FTK01 kit includes FTTR fiber termination tools (optical cable stripper, coating stripper, and fiber cutter) and is designed to be used with a field-mountable connector (FMC2105). This kit does not require special crimping tool

The Huawei OptiXstar EN8245X6s-8N is an intelligent ONT router utilizing XGS-PON and Wi-Fi 6 technologies. It provides ultra-broadband access, high performance, and extensive coverage. The device offers 1x 2.5 Gbit and 3x

The Huawei EchoLife WA8021V5 is a wireless router that is perfect for use in combination with ONT units in bridge mode or as a Wi-Fi repeater for an existing Huawei wireless router. With support for the WiFi 5 standard, the router

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The Huawei OptiXstar EG8145B7N-50 is a GPON ONT device with support for Wi-Fi 7. It offers: 1x SC/APC uplink connector, 1x 2.5 GE and 3x GE ports, 1x POTS port, and 1x USB port. Support for Wi-Fi 7 (2.4 GHz and 5 GHz with

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density. The MA5801-FL04-H1 is a

The Huawei OptiXstar EG8147X6-10 is an intelligent GPON and Wi Fi routing t ype ONT. It uses the GPON Wi Fi technology to implement ultra broadband access, high performance and wide coverage for users. The high forwarding performance ensures the user e

The EchoLife EG8040H6 is an indoor Optical Network Terminal (ONT). By using the GPON technology, ultra-broadband access is provided for home and SOHO users. The EG8040H6 provides four GE Ethernet ports and features high-p

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Huawei OSX040N01 is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 40km. The LC connectors in the SFP module have UPC polishing.

Huawei 10G SFP+ DAC cable in 1m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

Huawei 10G SFP+ DAC cable in 3m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

The Huawei active optical cable SFP-10G-AOC10M of Multi Mode type is used for direct connection of two SFP+ ports with a line speed of 10 Gbps. With a length of 10m and a bend radius of 30mm, it is suitable for connecting a pair of

Huawei SFP-10G-ZR is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 80km. The LC connectors in the SFP module have UPC polishing.

Huawei SFP+STACK-CU0M5 is dedicated stack copper cable with length of 0,5m equipped with SFP+ connectors, which is used for device stacking. Stacking using stack cables removes the need of configurations. Bend radius of t

Huawei SFP+STACK-CU0M5 is dedicated stack copper cable with length of 1,5m equipped with SFP+ connectors, which is used for device stacking. Stacking using stack cables removes the need of configurations. Bend radius of t

Huawei SFP-1000BaseT is copper RJ-45 module which supports speeds 10/100/1000 Mbps on distances up to 100m.

The Huawei SFP-GE-LX-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 10km. The LC connectors in the SFP module have UPC polishing.