Optical networks

The ATB3120-S-8 ADU (Active Distribution Unit) is an active optical device used to connect the main FTTR and the sub FTTR. It provides optical signals and power input for the sub FTTR. The products can be installed in an indoor information box or on a

Huawei FIK02 is an installation tool designed for use with FTTR optical self-adhesive cable. Its construction allows for consistent pressure to be applied along the entire cable path, ensuring better adhesion of the cable to various surfaces.

Huawei OSX040N01 is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 40km. The LC connectors in the SFP module have UPC polishing.

Huawei SFP-10G-USR is a multimode 10G SFP+ module with a wavelength of 850nm, two LC connectors, PC/UPC polishing, designed for ultra short distances. The module is suitable for connections up to 150m when using OM4 c

Huawei 10G SFP+ DAC cable in 1m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

Huawei 10G SFP+ DAC cable in 3m length is a fast and cheap solution for easily connecting two network active devices at 10Gbps speed without the need to purchase separate SFP+ modules and optical patch cables. A quality twinax DAC cable can b

The Huawei active optical cable SFP-10G-AOC10M of Multi Mode type is used for direct connection of two SFP+ ports with a line speed of 10 Gbps. With a length of 10m and a bend radius of 30mm, it is suitable for connecting a pair of

Huawei SFP-10G-ZR is a single-mode 10G SFP+ module with a wavelength of 1550nm and two LC connectors for a connection distance of up to 80km. The LC connectors in the SFP module have UPC polishing.

Huawei SFP-10G-iLR is a single-mode 10G SFP+ module with a wavelength of 1310 nm and two LC connectors for connection over distances of up to 1.4 km. 10GBASE-iLR is not a defined standard; it is based on the 10GBASE-LR standard. The LC connec

Huawei SFP+STACK-CU0M5 is dedicated stack copper cable with length of 1,5m equipped with SFP+ connectors, which is used for device stacking. Stacking using stack cables removes the need of configurations. Bend radius of t

Huawei SFP-1000BaseT is copper RJ-45 module which supports speeds 10/100/1000 Mbps on distances up to 100m.

The Huawei SFP-GE-LX-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 10km. The LC connectors in the SFP module have UPC polishing.

The Huawei eSFP-GE-SX-MM850 is a multi-mode 1.25G SFP module with a wavelength of 850nm and two LC connectors for connections up to a distance of 0,55km. The LC connectors in the SFP module have UPC polishing.

The Huawei eSFP-FE-LX-SM1310 is a single-mode 100Mbps SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 15km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH40-SM1310 is a single-mode 1.25G SFP module with a wavelength of 1310nm and two LC connectors for connections up to a distance of 40km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH40 is a single-mode 1.25G SFP module with a wavelength of 1550nm and two LC connectors for connections up to a distance of 40km. The LC connectors in the SFP module have UPC polishing.

The Huawei S-SFP-GE-LH80 is a single-mode 1.25G SFP module with a wavelength of 1550nm and two LC connectors for connections up to a distance of 80km. The LC connectors in the SFP module have UPC polishing.

The Huawei OMXD30000 is a multi-mode 10G SFP+ module with a wavelength of 850nm and two LC connectors for connections up to 0,3km. The LC connectors in the SFP module have UPC polishing.

The Huawei OSX010000 is a single-mode 10G SFP+ module with a wavelength of 1310nm and two LC connectors for connections up to 10km. The LC connectors in the SFP module have UPC polishing.

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Huawei FIK01 is an installation tool for working with transparent FTTR cable that is equipped with hot melt adhesive. The tool is used to activate the hot melt adhesive and for the primary fixation of the optical cable to the surface. The packag

The FTK01 kit includes FTTR fiber termination tools (optical cable stripper, coating stripper, and fiber cutter) and is designed to be used with a field-mountable connector (FMC2105). This kit does not require special crimping tool

Huawei FMC2105-SA is reusable dedicated field mountable SC connector with APC polishing. It can be re-assembled for at least five times. Connector passes the 500-hour accelerated aging test at 75°C/95% RH. The connector is intended for

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density. Huawei SmartAX MA5801-FL16 i

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density. Huawei SmartAX MA5801-GP16 i