MikroTik power adapter with 5V voltage, maximum current 1A, max. Power 5W and microUSB connector. This power source is suitable, for example, for MikroTik hAP mini, hAP lite and cAP lite.

LHGmount is low cost, metallic, easily adjustable holder for all LHG series units, including larger LHG XL models. The unit is installed with 4 screws included in the package. The holder can be mounted on a pipe with a maximum diameter of 58mm.

The RB4011 wall mount kit is made for protecting your device and it’s ethernet ports from unauthorised access. Made from durable steel, the mount attaches to a wall and allows the ethernet cables to be plugged in, before the router is mounted inside. T

5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all MikroTik products with SFP/SFP+ ports, including new

±48 V DC telecom Open Frame Power supply with 12 V 8 A output, for use with new “r2” revision of Cloud Core Routers. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for -48 V installations. Compatibility

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

U.fl-SMA female pigtail, that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)

The GPeR unit allows to extend Ethernet cable by additional hop (

Wi-Fi has to be fast, reliable, easy to manage, it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses!

wAP LR9 kit – an out-of-the-box solution to use LoRa® technology. This kit contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet p

MikroTik GB60A-S12 is a replacement internal power supply that is specially designed for some MikroTik devices. Total power is 60W at 12V and 5A max. current. Compatible with CCR1016 r2 models

MikroTik UP1302C-12 is a replacement internal power supply that is specially designed for some MikroTik devices. Total power is 130W at 12V and 10.8A max. current. Compatibility list CCR1036-8G-2S+EM (rev. 2) CCR1

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The P1 license has a speed limit of 1 Gbit for uploading to the interface and the lossy parameters are based on t

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The P10 license has a speed limit of 10 Gbit for uploading to the interface and the lossy parameters are based on

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The PU license does not have a speed limit, other parameters are based from the L6 license. Minimum

The RB450Gx4 is an Ethernet router with five Gigabit Ethernet ports, a serial port, 512 MB NAND memory and a microSD card slot. In addition, it supports full 10 V - 57 V input by two power jacks or PoE (802.3af/ at or passive PoE) and can provide PoE o

The CWDM is a passive MUX/DEMUX unit, which allows to combine up to eight fiber links into one, to simplify and reduce the cost of long distance fiber installations. At the other location, the combined line is split back up again, so that instead of ei

S-C53DLC40D is a singlemode 1.25G SFP CWDM module with a 1530nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov

S-C57DLC40D is a singlemode 1.25G SFP CWDM module with a 1570nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov

S-C59DLC40D is a singlemode 1.25G SFP CWDM module with a 1590nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov

S-C61DLC40D is a singlemode 1.25G SFP CWDM module with a 1610nm wavelength and two LC connectors for connection up to 40km. CWDM in your network will allow you to Increase efficiency of existing fiber network Prov

The S-4554LC80D is sold as a kit of two single mode WDM modules with Gigabit speed, one LC connector on each side and maximum distance up to 80km. The wavelengths of the modules are 1490 / 1550nm and 1550 / 1490nm.

We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installatio

RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series). The RBM33G fea

The wAP R is a small weatherproof wireless access point with miniPCI-e slot reserved for LTE card. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP R also has

The wireless wire offers blazing fast Gigabit speeds for transparent connectivity between two locations, without any sacrifice in your LAN speeds. Simply point the included devices at one another and power them on, they are already preconfigured

CRS112-8P-4S-IN is an eight-port Gigabit PoE Router/Switch that offers various PoE-Out power options. In addition to passive PoE, it also offers 802.3af/at standards on all eight ports. In addition to the metal ports, you can use 4 optical SF

The Wireless Wire Dish is a ground breaking solution which offers Fiber speed and quality on distances up to 1500m for a fraction of the price! This amazing kit makes a secu

The LtAP mini is a small watherproof wireless access point with a prepared miniPCI-e slot for cellular modem supports 2G,3G and 4G (LTE) connectivity. In black case are prepared 2 LTE antennas with u.Fl connector and 3,5dBi gain. Conne

MikroTik 24V2APOW is a replacement internal power supply that is specially designed for some MikroTik devices. Total power is 60W at 24V and 2.5A max. current. Compatibility with these models CCR1009-7G-1C-1S+ CRS31