Optical networks

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

Product description prepares.

10G singlemode optical CWDM module with a wavelength of 1290nm. The module is compatible with both SFP+ and SFP interfaces and is suitable for links up to 20 km. It features 2 LC connectors with UPC polish. Key Features

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density. The MA5801-FL04-H1 is a

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

The Huawei OptiXstar EG8147X6-10 is an intelligent GPON and Wi Fi routing t ype ONT. It uses the GPON Wi Fi technology to implement ultra broadband access, high performance and wide coverage for users. The high forwarding performance ensures the user e

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be rapidly deployed on applicable surfaces. After routing the optical cable, use adhesive

Teltonika PR4JR20K is a Gigabit cooper RJ45 transceiver. The module has a range of 100m.

Teltonika PR4LC21K is a set of single-mode 1G SFP WDM modules for data transmission using a single fiber with one LC connector. The wavelength (Tx and Rx) of these modules is 1310 and 1550nm, making them suitable for connections up to 20km

Teltonika PR4DU22K is a 1.25G SFP module with an 850nm wavelength, two LC connectors, and a maximum distance of 550m over multimode optical fiber.

Huawei eKitOptiX F1002-AC-H1 is a powerful enterprise optical gateway designed for reliable, high-speed data transmission in medium and large networks – ideal for hotels, schools, office buildings, and modern enterprise infrastructures.

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The indoor pre-connected transparent bow type cable (pre-adhesive cable) with hot melt adhesive is suitable for indoor cabling scenarios. It can be routed in exposed manner or through a pipe. It can be rapidly deployed on applicable surfa

The ATB3120-S-8 ADU (Active Distribution Unit) is an active optical device used to connect the main FTTR and the sub FTTR. It provides optical signals and power input for the sub FTTR. The products can be installed in an indoor information box or on a

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

Product description prepares.

Maxlink ML-S+2733-10-H3C is a 10G SFP+ WDM module with a Tx 1270 / Rx 1330 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S+3327-10-H3C is a 10G SFP+ WDM module with a Tx 1330 / Rx 1270 wavelength, a single LC connector, and a maximum transmission distance of 10km over single-mode optical fiber. The SFP+ module supports monitoring (DDM).

Maxlink ML-S31D-20-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors i

Maxlink ML-S31D-3-H3C is a 1.25G SFP module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 3km over single-mode optical fiber. The SFP module supports monitoring (DDM). The LC connectors in

Maxlink ML-S+31D-10-H3C is a 10G SFP+ module with a 1310nm wavelength, two LC connectors, and a maximum transmission distance of 20km over single-mode optical fiber. The SFP+ module supports monitoring (DDM). The LC connectors

Self-bonding transparent fibers are applicable to indoor FTTH or FTTR networking scenarios. They are delivered with adhesive and can be quickly attached to suitable wall surfaces after the release film is removed After routing the optical

MC212CS-2 is an optical-metallic WDM converter from RJ45 to optical SC connector. Maximum throughput is 1000Mbps FD, which is also adapted to the Ethernet port, which can communicate with your device with 10/100/1000 Mbps speed. The conve

The Omada Optical Networking Solution delivers enterprise-grade gigabit passive optical networking. It seamlessly integrates essential components such as Omada switches, gateways, OLTs (Optical Line Terminals), and ONUs (Optical Network Units)—perfect

The Omada Optical Networking Solution delivers enterprise-grade gigabit passive optical networking. It seamlessly integrates essential components such as Omada switches, gateways, OLTs (Optical Line Terminals), and ONUs (Optical Network Units)—perfect

Suché bezprašné ubrousky jsou určeny k čištění optických vláken a kabelů. Lze je použít jak suché, tak navlhčené Isporopylalkoholem. Balení obsahuje 280ks, rozměry ubrousků jsou 11 x 21cm.