Powering

The UniFi Switch USW-Pro-XG-10-PoE is a managed L3 PoE switch with a switching capacity of 240 Gbps, (10) 10-Gigabit LAN ports and two SFP+ (1/10Gbps) ports. All Ethernet ports support PoE+++ 802.3af/at

An AC adapter with integrated PoE, enabling the UniFi Cloud Gateway device to support PoE output on a single port. Adapter is equiped with USB-C 5V/5A output and integrated PoE 48V/0.65A. PoE power is supplied on all pins: 1, 2, 4, 5 (+)

The EdgePower 54V 72W is a UNMS monitored and managed 54V DC power supply with integrated battery backup. This product provides WISPs with an easy-to-install 54V redundant power supply that includes a management user interface, SNMP, and simple 12V bat

The UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached

UniFi Switch Enterprise 48 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 320 Gbps, (48) 2.5-Gigabit LAN ports and four SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out wit

Ubiquiti Switch Plus is a powerful PoE switch designed for both home and office. There are 4 LAN ports with speeds up to 2.5 Gbps and passive 27V PoE output. The optical interface will offer 4 SFP+ ports with speeds up to

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 1.5m long. The cable is very robust, contains 2 wires

USW-Flex-Mini is a tiny 5-port Gigabit switch managed by UniFi Controller from Ubiquiti in a desktop version with the first port supporting PoE In. PoE IN over Eth1 Its biggest advantage is the Gigabit POE IN on port #1 for

Ubiquiti EdgePoint EP-S16 is an Gigabit L2/L3 outdoor switch with output POE on all 16 ports and input POE on the first two ports. With this product, you no longer have to pull the cables from the roof to the lower floors for each active

UISP series uninterruptible power system designed for MicroPoP applications, which includes routers and switches. The separately sold connection cable UACC-Cable-PT is available in different lengths from 0.5m to 50m, and cables of different leng

Ubiquiti Pro Max 24 is a quality switch. It has 8 LAN ports with speeds up to 2.5 Gbps. The other 16 ports have a speed of 1 Gbps. There are also 2 SFP+ ports with speeds up to 10 Gbps. The switch can be configured using UniFi

A pair of extenders that allow you to extend PoE over twisted pair or coaxial cables. This solution is ideal for situations where replacing the original cabling is not an option. Each extender features a 1x 10/100 Mbit ETH port and a two-pin con

The UniFi Switch USW-Pro-XG-48-PoE is a managed L3 PoE switch with a switching capacity of 920 Gbps, (16) 2.5-Gigabit LAN, (32) 10-Gigabit LAN ports and four SFP28 (25G/10G/1G) ports. All Ethernet ports

10-Gigabit PoE switch Ubiquiti UniFi Switch XG 6POE with desktop design with maximum output PoE power 170W. Switch has 4x 10-Gigabit LAN ports and 2x 1/10G SFP+ optical ports with overall throughput 120 Gbps. 60W PoE Out on e

Internal cable reduction from Ethernet to USB-C port, which is used for power supply and data transfer and is intended only for the following products from Ubiquiti:

Versatile PoE adapter that delivers 48V DC passive PoE up to 100W to power any two Wave models and provides 2.5 Gbps connectivity. Power method is by Power TransPort DC input 27V DC. Supported Wave models

Ubiquiti USW-Pro-Max-24-PoE is a 24-port L3 PoE switch with 8x 2.5Gb POE++ ports and 16x 1Gb ports, where 8 ports are POE++ and 8 ports POE+. Total PoE availability is 400W.Switch provide 2x SFP+ ports and is ready for DC po

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 0.5m long. The cable is very robust, contains 2 wires

The Ubiquiti POE-24-24W is a grounded PoE injector with a maximum output power of 24 W. It provides one input port for a traditional LAN connection and a second port as a PoE output port. The maximum data transfer rate is 100 Mbps. Key Featu

Original Ubiquiti transport power adapter UACC-Adapter-PT-120W with EU socket plug, atypical 2-pin PowerTransport connector designed to power specific Ubiquiti devices (UISP Box, UISP Power, UISP Router and UISP Switch) with output vo

UISP-S-Pro is an ideal switch for deployment between ISP providers. It is a fanless L2 PoE switch with 24x Gigabit LAN and 4x SFP/SFP+ ports for further expansion using optical fiber. The UISP Switch is a cost-effect

UniFi Switch Enterprise 24 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 124 Gbps, (12) 2.5-Gigabit LAN ports, additional (12) Gigabit LAN ports, and two SFP+ (10 Gbps) slots. All Eth

The rack-mountable EdgePower features two PSU bays. One 54V, 150W AC-DC module is included, and an optional AC-DC or DC-DC module is available. The EdgePower provides up to 150W of power output. With an optional PSU in the secondary bay, the

EP-54V-150W-AC power supply is removable power solution for EdgePower. The output power of the power supply is 150W (54V) with a 230V input voltage.

EP-54V-150W-DC is removable power supply (voltage converter) for EdgePower solution. The output power of the power supply is 150W (54V) with a variable input power via DC terminal.

Product designed for mounting PoE sources on a wall. Only for new revisions PoE adapters.

PC-12 PowerCable is an all-weather, UV-resistant cable designed for outdoor installations. PowerCable uses a fire-resistant, polyethylene jacket (FT-1) and operates in a temperature range from -30 to 90° C. PowerCable features 12 AWG stranded tinned co

U-MPS-350W-AC is a backup power module with a power of 350W and is designed for selected Ubiquiti UniFi PoE Switches in a 19" rack with removable power supplies. The power supply can be used as an auxiliary power supply for supplying another 350W

The RPS-AC-100W is a 100W power supply and is designed for Ubiquiti units designed for 19" rack with removable power supplies. In case of failure of the primary source, the unit detects an error and the power automatically switch to the second power so

MUSB-1A-B-5 is a set of 5 power adapters with output voltage 5V, maximum current 1A and microUSB connector. The power adapter is primarily intended for UFiber Loco from Ubiquiti, but it will also be used for other products with a microUSB connector and