Optical networks

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a

UISP-FIBER-OLT-XGS offers 8x10Gb/s XGS/XG-PON ports and supports up to 256 clients per port, 2048 clients overall. There are 4x SFP28 uplink ports with speeds up to 25Gb/s. The OLT supports redundant power supply.

UISP-FIBER-XGS is a CPE ONU unit for XGS/XG-PON solutions, with which you can upgrade your network to 10Gbit. The device itself serves to convert GPON to LAN and only supports Bridge mode, not Router mode. For connection to the XGS/XG-PON network, it u

UISP-FIBER-XG is a CPE ONU unit for XGS/XG-PON solutions. The device itself serves to convert optical GPON to metallic LAN and only supports Bridge mode, not Router mode. For connection to the XGS/XG-PON network, it uses 1x SC connector with

The wavelength division multiplexing module combines XGS/XG-PON and GPON services into one optical fiber distribution system. The module features 24 ports: 8 XGS/XG-PON ports, 8 GPON ports, and 8 ports towards clients. The filter operates with

The Ubiquiti UACC-OM-SM-10G-S-20 is an SFP+ data transmission module using single-mode optical fiber. The data transfer rate is 10 Gbps, the maximum power consumption is 1 W, and the transmission range reaches 10 km. SFP+ module

The UACC-OM-SFP28-LR is an optical module that operates at speeds up to 25 Gbps. It operates in Single-mode and guarantees a range of up to 10 km Key features Transfer speed up to 25 Gb/s Range up to 10

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

UV-resistant enclosure, designed for pole or wall mounting, with a removable reel for organization and reduced physical strain on fiber optic cables.

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 3m or 30m variants. The cable is ideal for creating short connections between switches, routers,

Passive DAC cable for direct connection between two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 30 meters long and is also available in 3m or 0.15m variants. The cable is ideal for creating short connections between switches, rou

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m or 0.15m variants. The cable is ideal for creating short connections between switches, routers,

4-channel CWDM Mux/Demux (1270 to 1330 nm) designed to increase the capacity of existing optical infrastructure, with rack-mountable options.

8-channel CWDM Mux/Demux (1450 to 1590 nm) designed to increase the capacity of existing optical infrastructure, with the option for rack mounting.

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 2 km. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con