Optical networks

UFiber GPON SFP modul with PN: UF-GP-C+ is designed to GPON slots in OLT unit from Ubiquiti. It is a special SFP module with asymmetric speed 2,5Gbps upload, 1,25Gbps download in direction to clients. GPON SFP module has SC connector with UPC

UFiber OLT 4 offering 4 GPON ports with support up to 128 clients per port, overall up to 512 concurrent clients with physical fibers up to 20 km. UF-OLT-4 has 4 GPON port and

Modern, elegant industrial design, robust design and high performance - this is U Fiber Loco, a CPE unit for GPON solutions. Device status information Compared to version UF-NANO on this unit lacks an information LED display, inst

Modern, elegant industrial design, robust design and high performance - this is U Fiber Loco, a CPE unit for GPON solutions. Device status information Compared to version UF-NANO on this unit lacks an information LED display, inst

UBNT FiberPOE is low-cost, Gigabit, opto-metalic outdoor Converter, which in addition to transferring data from an optical fiber to a metallic cable can also power via PoE. Compared with the first generation, it can handle a larger larger temper

Ubiquiti UACC-OM-SFP28-SR is an optical 2-fiber Multi Mode module type SFP28 with a speed of 25 Gbps and 2x LC connectors with upc polishing. The wavelength of the module Tx and Rx is 850nm and Tx power is allows range up to 10

UV-resistant enclosure, designed for pole or wall mounting, with a removable reel for organization and reduced physical strain on fiber optic cables.

UF-SM-10G-S is set of singlemode 10G SFP+ WDM modules with 1 LC connector. Wave length is 1270/1330nm, this modules are suitable for distance up to 10km. Modules are compatible with all Ubiquiti devices which contain SFP+ ports. Package cont

UISP-FIBER-OLT-XGS offers 8x10Gb/s XGS/XG-PON ports and supports up to 256 clients per port, 2048 clients overall. There are 4x SFP28 uplink ports with speeds up to 25Gb/s. The OLT supports redundant power supply.

UISP-FIBER-XGS is a CPE ONU unit for XGS/XG-PON solutions, with which you can upgrade your network to 10Gbit. The device itself serves to convert GPON to LAN and only supports Bridge mode, not Router mode. For connection to the XGS/XG-PON network, it u

UISP-FIBER-XG is a CPE ONU unit for XGS/XG-PON solutions. The device itself serves to convert optical GPON to metallic LAN and only supports Bridge mode, not Router mode. For connection to the XGS/XG-PON network, it uses 1x SC connector with

The wavelength division multiplexing module combines XGS/XG-PON and GPON services into one optical fiber distribution system. The module features 24 ports: 8 XGS/XG-PON ports, 8 GPON ports, and 8 ports towards clients. The filter operates with

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 10 km. Key Features Data transfer rate up to 10

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Single-mode and ensures a range of up to 2 km. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 100 Gb/s. The module is compatible with QSFP28 and QSFP+ interfaces. It works in Multi-mode and ensures a range of up to 100 m. Key Features Data transfer rate up to 100

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

An optical module operating at speeds of up to 10 Gb/s. The module is compatible with SFP+ and SFP interfaces. It works in Single-mode and ensures a range of up to 20 km. Key Features Data transfer rate up to 10 Gb/s

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 10 m long but is also available in other variants. The cable i

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 20 m long but is also available in other variants. The cable i

The active Multi Mode optical cable is used for direct connection of two SFP28 ports with a link speed of 25 Gbps. This ultra-thin (3mm) optical cable is 30 m long but is also available in other variants. The cable i

The durable outdoor junction box can be installed on a wall or mast and protects UFiber devices (UF-Nano, UF-Loco and UF-AE) from adverse weather conditions, so they can remain functional in all conditions. This rugged enclosure has a screw lock design

Passive DAC cable is used for direct connection of two SFP28 ports with line speed 25 Gbps. This cable is 1 m but is also available in other variants. The cable is ideal for creating short connections between switche

4-channel CWDM Mux/Demux (1270 to 1330 nm) designed to increase the capacity of existing optical infrastructure, with rack-mountable options.

8-channel CWDM Mux/Demux (1450 to 1590 nm) designed to increase the capacity of existing optical infrastructure, with the option for rack mounting.

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config