The new dualband bullet as the successor to the airMAX series is a universal single-polarised radio unit with N-male connector that directly mounts on the antenna. In addition to the commonly used 5GHz band, the drive also supports the

The isolation antennas are interchangeable and feature high-performance beam patterns for a range of demanding deployment needs. Combined with the PrismStation 5AC or IsoStation radio, the system gets maximum gain out of the smallest footprint.

Precision Alignment Kit to better attach the antenna. Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance. Applies to the following models airFiber®AF-5G30-S45 PowerBeam ™

Ubiquiti RocketDish RD-5G31-AC is a 2x2 parabolic antenna suitable for long PtP coupled using Rocket M units. The main benefit compared to the previous model is excellent isolation of the antero-posterior ratio and SNR / noise isolation. A great benefi

AirFiber 60 XR (AF60-XR) is a 60GHz point-to-point (PtP) device from Ubiquiti with long range up to 15+ km and is ideal for ISPs looking to maximize point-to-point speeds with cost-effective equipment. The unit is also equipped

Point-to-point (PtP) parabolic antenna that can work effectively in a very wide frequency range from 5.150 to 6.875 GHz. UISP Dish is a directional parabolic antenna with 30dBi gain and a special WaveGuide co

UniFi Access Rescue KeySwitch is a single pole dual throw manual KeySwitch designed to work with the UniFi Access system. In the event of a system malfunction, the UA-Rescue KeySwitch allows for a user to manually unlock any door controlled by t

The UniFi Next-generation Gateway Pro (UXG Pro) is a powerful security gateway that delivers a versatile networking interface and enterprise-class threat management functionality to medium to large-sized networks. The UXG Pro is equipped with (

Internal cable reduction from Ethernet to USB-C port, which is used for power supply and data transfer and is intended only for the following products from Ubiquiti:

The elegant aluminum stand with non-slip feet is only for the Cloud Key G2 Plus from Ubiquiti, which will hold the controller in an upright position. The dimensions of the base are 134 x 72 mm.

Dream Wall is another in the range of UniFi All-in-one devices. It contains a gateway with a firewall, Wi-Fi 6 access point, NVR and a switch with PoE function. The unit provides a wide range of network connectivity options. It offers

Plug-and-play high-performance audio module - microphone and speaker in one designed exclusively for the UniFi Protect AI Theta camera with a maximum consumption of 4.5W. The speaker is supplied with a 1m USB-C connecting cable and a

Ubiquiti USW-WAN-RJ45 is a 10-Gigabit WAN switch designed for high-availability networks. It aggregates the connection of 2 UniFi Cloud Gateways in Shadow Mode into a single output towards the ISP*, ensuring redundancy in the ev

The UniFi Protect family camera features a 8MP sensor (3840 x 2160px) at 30 fps, a varifocal lens (22x optical zoom), and adaptive IR illumination for night vision up to 100 meters. The camera has a

Well-crafted shelf that fits perfectly into the U-Rack-6U-TL cabinet. It has a depth of 230 mm and occupies 1U of rack height. The shelf is made of cold-rolled

The product has original package, complete accessories and was used on the exhibition. Wave Access Point is a 60GHz point-to-multipoint (PtMP) transmitter unit with built-in 5 GHz backup (

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 0.15 meters long and is also available in 0.3m, 3m or 30m variants. The cable is ideal for creating short connections between switches, ro

UniFi Premium Patch Cable Outdoor, The ultra-thin shielded outdoor patch cable Cat.6a with a length of 8m is designed to deliver optimal performance even in the most demanding conditions, specifically for 10GbE networks. It is an i

Device Bridge Pro Sector is a PTMP WiFi 5 access point from the UniFi device family. It operates in the 5 GHz band with a maximum modulation rate of 400 Mbps. The unit features a 90° sector antenna with a gain of 17 dBi and can con

Passive DAC cable for direct connection of two SFP, SFP+, or SFP28 ports with a link speed of 25 Gbps. This cable is 3 meters long and is also available in 30m or 0.15m variants. The cable is ideal for creating short connections between switches, routers,

Shelf for devices that are not intended for rack mounting. Compatible with U-Rack-6U-TL.

An optical cable suitable for connecting active devices (e.g., switch, router, server). It uses single-mode 9/125 fibers terminated with two LC connectors on both ends. The overall cable diameter is 2mm. The ferrule polishing is in UPC config

Optical cable suitable for connecting both active and passive devices. It uses singlemode 50/125 (OM4) fiber, terminated with two LC connectors on both ends. The total cable diameter is 2mm. The ferrule polishing is in UPC (Ultra Physical Con

Protected box for Ubiquiti Switch Plus. The box is designed to be used outdoors thanks to IPX6 certified protection, your switch will be safe. It can be attached to a 35 to 60 mm diameter pole.

UACC-Intercom-SAM is a mounting accessory for fixing the UA-Intercom intercom to a surface at an angle of 5° upwards. The holder is made of UV stable polycarbonate.

A compact and powerful UniFi gateway with a full suite of advanced routing and security features. Key features Up to 10x routing performance increase over USG (tested with IPS/IDS, QoS, and Smart Queues) Managed with

Original Ubiquiti transport power adapter UACC-Adapter-PT-120W with EU socket plug, atypical 2-pin PowerTransport connector designed to power specific Ubiquiti devices (UISP Box, UISP Power, UISP Router and UISP Switch) with output vo

nHD-cover-Concrete is a cover for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Concrete design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE is not

The UniFi Access G2 Starter Kit is the second generation of the basic set of components to install the UniFi Access access system. The set is compatible with most electric locks, magnetic locks and a whole range of 12V accessories suc

UISP-S-Pro is an ideal switch for deployment between ISP providers. It is a fanless L2 PoE switch with 24x Gigabit LAN and 4x SFP/SFP+ ports for further expansion using optical fiber. The UISP Switch is a cost-effect