Wireless

Specifikace: anténa pro Mimosa Twist-on vlnovod; precizní, masivní držák JDMW-900 vyvinutý pro profesionální mikrovlnné spoje; jemné a snadné nastavení elevace a azimutu; extra vysoká korozní odolnost; hluboká parabola zvyšuje izolaci mezi jednotlivými...

Affordable mobile internet connectivity in remote areas. Lowest price ever – due to the brand new, cost-effective LTE modem FG621-EA. This LTE chip can provide reliable Internet connectivity for your building even where cell phones fail. Included two

Magnetic GPS Ubiquiti antenna with SMA male connector and 1m cable lenght.

Cambium Networks ePMP 6 GHz 2x2 antenna provides 25 dBi gain when using a remote extender up to 28 dBi. It operates in the frequency band from 5.1 GHz to 7.1 GHz. The antenna is compatible with the Cambium Networks ePMP 6 Force 4600C. Thanks to

ePMP 4500 The ePMP 4500 delivers up to 4 Gbps and supports up to 120 subscriber modules. Featuring 8x8 MU-MIMO, the 5 GHz ePMP 4500 can transmit to four Force 400 SM’s at the same time. This effectively quadruples the capacity of 2x

Cambium Networks’ 60 GHz cnWave solution provides easy, fast and cost-effective wireless gigabit connectivity for edge access and/or high-capacity backhaul for edge access solutions at a significantly lower TCO than fiber infrastructure. Service

IW-HD-BK is a cover for Ubiquiti UAP In-Wall HD with a black theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-CF je kryt k Ubiquiti UAP In-Wall HD s maskovaným motivem. Pro náročné zákazníky je na výběr celkem z 5ti volitelných motivů krytů. Na četné žádosti zákazníku jsme se rozhodli kryty prodávat také po jednotlivých kusech, balení produktu tak není v...

IW-HD-CT is a cover for Ubiquiti UAP In-Wall HD with a concrete theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-MB is a cover for Ubiquiti UAP In-Wall HD with a marble theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

IW-HD-WD is a cover for Ubiquiti UAP In-Wall HD with a wooden theme. For demanding customers, there are a total of 5 optional cover designs to choose from.

Halo works as a unified system that guarantees a strong Wi-Fi signal in every corner of your home and provides an incredibly fast and stable network. Dropping connections and buffering will become a thing of the past. In the package you will

Archer A8 is a well-equipped Dual-Band router by TP-Link, which includes 4× Gigabit LAN, 1× Gigabit WAN and 3 fixed antennas. The wireless part can work in two bands at the same time, at a speed of 600 Mbps in the 2.4 GHz band

Archer AX1800 is a Wi-Fi 6 Dual-Band router from TP-Link, which includes 4× 10/100/1000Mbps LAN, 1× 10/100/ 1000Mbps WAN and 4 fixed antennas. The wireless part can work in two bands at the same time, at a speed of 574 Mbps in

Deco PX50 is the easiest way to guarantee a strong Wi-Fi signal in every corner of your home. Wireless connectivity and optional linking of all units either by Ethernet cable, wireless, powerline or combined provide even higher network speed

The product was used for outdoor testing (14 days). So there are visible signs of assembly. N5-X25 is parabolic directional antenna with gain 25dBi and beamwidth angle 8° for use with C

EAP613 is a wireless Access Point from the TP-Link brand, from the EAP family and is intended for indoor use with ceiling or wall mounting. Dual-band WiFi 6 AP with support for WiFi standards 802.11a/b/g/n/ac/ax is 2×2 MIMO in the 2.4

Deco X50-5G is the easiest way to guarantee a strong Wi-Fi signal in every corner of your home in combination with the Internet via 3G/4G/5G/LTE networks or cable Internet via classic Ethernet. The wireless connection and optional linking of all units

The holder is intended for attaching selected Deco wireless Access Point units of the TP-Link brand to the wall using two screws. The holder is made of PETG material on a 3D printer and is white in color. The mount is only compatible

Reyee RG-EG210G-E is a wired Gigabit router with VPN suitable for small and medium-sized businesses. A safe and reliable router with its own web management, the ability to manage via Ruijie Reyee Cloud from anywhere and anytime, but also blocki

LoRa omnidirectional antenna with 6.5 dBi gain for the frequency band 900 to 928 MHz with one SMA female connector and IP66 protection. The package includes a removable 1m long pigtail with SMA male

Ultra thin, only 10.8mm deep futuristic router, which was designed for easy installation on a wall. Archer Air R5 with Wi-Fi 6 support, smart antennas using intelligent algorithms to automatically d

Ultra-thin only 8mm deep modern Range Extender was designed for easy installation on a wall. Archer Air E5 with Wi-Fi 6 support connects wirelessly to your existing Wi-Fi router thanks to its four built-in an

KNOT is a truly universal device with a wide range of connection options and support for protocols and interfaces. It is an IoT Gateway that uses LoRa technology (902 - 928 MHz) but also Narrow Band and CAT-M b>, which a

AP100 is the first-ever Teltonika Networks Access Point. It is equipped with 2.4GHz WiFi with WPA2/WPA3 security standards. For network connectivity has 1x 100Mb/s port with PoE 802.3af support. Web management or RMS Mana

AP100 is the first-ever Teltonika Networks Access Point. It is equipped with 2.4GHz WiFi with WPA2/WPA3 security standards. For network connectivity has 1x 100Mb/s port with PoE 802.3af support. Web management or RMS Mana

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime

The plastic holder is designed to mount the UCK-G2-PLUS from Ubiquiti to 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other.

The plastic wall mount is designed to mount Halo H50 / H30 / S12 / S3 Mesh Access Points from Mercusys. The holder is made using 3D printing, has a white color and its dimensions are 123 × 40 × 91mm.