Powering

Cable adapter with three sockets for connection to UPS with IEC connectors. Specifications Cable length 30 cm Max. operating current 10 A Nominal voltage 250 V IEC C14 plug CEE 7/3 (F)

Cambium Network - Gigabit Poe injector N000900L017B is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 15W, which is sufficient for the devices such as cnPilot

USB converter serve to powering any device by USB port. Its converting 802.3af PoE to 5V/2A with 10W maximum load. Example of installation Important note: converter does not convert data from Ethernet to USB, but only power

Průřez vodiče 4,0 - 6,0 mm2; Materiál: elektrolytická měď, pocínovaný; PVC izolace, s rozšířenou izolační objímkou, vhodný pro harmonizované kabely

The UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached

Ubiquiti Pro Max 16 is a new L3 switch that offers 4x 2.5 Gbps and 12x 1 Gbps ports. For optical interface connection, there are 2 SFP+ ports achieving speeds up to 10 Gb/s. The switch is powered via a USB-C 5V DC 25W.

USW-Flex-Mini is a tiny 5-port Gigabit switch managed by UniFi Controller from Ubiquiti in a desktop version with the first port supporting PoE In. PoE IN over Eth1 Its biggest advantage is the Gigabit POE IN on port #1 for

Power 9V adapter suitable especially for powering some routers and switches with a standard DC connector 5.5 / 2.1mm. The maximum current consumption is 0.6A.

OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 9W and a maximum out

The USW-Pro-48 is a manageable Gigabit L2 switch with 48x Gigabit LAN ports and four SFP+ ports with a transfer rate of 10Gbps. In addition to the standard equipment, the switch also has a 1.3" touch screen for providing informatio

AGM lead acid battery with 12V voltage and 12Ah capacity with Faston 6.3mm connectors. Expected service life of 10-12 years. This battery is suitable, for example, as a replacement for the original battery in your UPS.

PoE injector POE1A2L is used to power WiFi devices via Ethernet cable using so-called passive PoE. This PoE injector has 2.1/5.5mm power connector and two Ethernet ports, of which the port labeled PoE is toward the powered device. Passive PoE is

Two-level UPS with UPS function, suitable for backup, Wireles or Security systems for external batteries. Output voltage/current: 27.6/5 + 27.1/0.5 UPS function Built-in PFC - Power Factor Corrector (correcti

POZOR !!!; Před připojením je nutné zkontrolovat polarizaci kabelu. SPECIFIKACE; Typ konektoru: O 2.1 / 5.5 mm Třída kabelu; Připevňování vodiče: Pájení; Délka kabelu: 1.5 m; Určení: Elektrický kabel; Materiál: PET; Příklad použití: • OMY-2X0.75; • K-6...

MaxLink MAXPIDIN30 is an active PoE injector with DIN rail mounting with input DC power supply 12 to 48V. The output of this power source is a Gigabit port with 802.3af/at PoE (55V) designed for WiFi, VoIP or wireless links. PoE is distri

UniFi Switch Enterprise 48 PoE is a reliable manageable 2.5-Gigabit L3 Switch with a switching capacity of 320 Gbps, (48) 2.5-Gigabit LAN ports and four SFP+ (10 Gbps) slots. All Ethernet ports support 802.3af/at PoE-Out wit

Internal cable reduction from Ethernet to USB-C port, which is used for power supply and data transfer and is intended only for the following products from Ubiquiti:

Original MikroTik power adapter 48POW with EU plug for plugging into a socket, with a standard 5.5 / 2.1mm connector intended for powering, for example, MikroTik devices with input voltage 48V DC. The power adapter h

Redukce pro DC zdroje, konvertuje 2.1mm DC jack na 2.5mm DC plug (z 2.1mm adaptéru redukuje na 2.5mm přístroj), rovná, 180 stupňů. Redukce je vhodná například pro APU.1C1, APU.1C4, APU.1D4.

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 50V and max. current 1.5A. The maximum output power is 80W. It is not backward compatible with 100Mbps devices due to the power supply that runs through

Lead battery with voltage 12V and capacity 40Ah. The battery has M6 connectors for connecting device. Battery life is 12 years when using in standby. The battery is suitable for use with a voltage converter as a backup power supply or as a re

TP-Link TL-SG2008P is a desktop manageable switch with 8x Gigabit LAN, of which 4 ports also support PoE out 802.3af/at for powering cameras, access points and similar devices with active PoE support. The total PoE budget on ports 5 to 8

MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi

Ubiquiti Pro Max 24 is a quality switch. It has 8 LAN ports with speeds up to 2.5 Gbps. The other 16 ports have a speed of 1 Gbps. There are also 2 SFP+ ports with speeds up to 10 Gbps. The switch can be configured using UniFi

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

Dvouhladinový zdroj s funkcí UPS, vhodný pro zálohové, Wireles nebo Security systémy pro externí akumulátory; Výstupní napětí/proud: 54/2.7 + 563.5/0.2; UPS funkce; Vestavěný PFC - Power Factor Corrector (korekce účiníku, nebo také jalové složky); Univ...

TL-SG1005P is a 5 10/100/1000Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situatio

TL-POE170S is a very robust Gigabit power PoE injector that supports 802.3af/at/bt standards with a power of up to 60 W, which is a suitable solution for PTZ power supply cameras, LED panels, more powerful Wi-Fi APs and other devices. The

The DC link cable terminated by ears on both sides is ideal for connecting M6 threaded batteries. By connecting multiple batteries, you can increase the output voltage (serial connection) or total capacity (parallel connection). The cable is made of a

MikroTik Cloud Router Switch CRS354-48P-4S+2Q+RM is very powerfull switch with 2x QSFP+, 4x SFP+, 48x Gigabit and one 10/100Mbps metalic port only for management. Switch provides total throughput 168 Gbps and switching capacity 336 Gbps with 235 Mpps f