UK Ultra Panel Antenna is a specially designed dual-band sector antenna with 90° beamwidth and 10 dBi gain in the 2.4 GHz band and 15 dBi in the 5 GHz band. It is intended for installation in combination with a UniFi

UK Ultra Omni Antennas are a specially designed dual-band omnidirectional antennas with 360° beamwidth and 3 dBi gain in the 2.4 GHz band and 4 dBi in the 5 GHz band. They are intended for installation in combination

UISP-R-Pro is the ideal router due to its performance for deployment in the corporate sphere. The router has 8x Gigabit LAN, 1x Gigabit WAN, 4x SFP+ (1G and 10G support) ports for further expansion using optical fibe

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 0.5m long. The cable is very robust, contains 2 wires

Power two-core outdoor DC cable from Ubiquiti from the UISP TransPort series of cables with special Power TransPort connectors on both sides and 1.5m long. The cable is very robust, contains 2 wires

The UniFi Access G2 Starter Kit is the second generation of the basic set of components to install the UniFi Access access system. The set is compatible with most electric locks, magnetic locks and a whole range of 12V accessories suc

UniFi Access G2 Starter Kit professional is a professional basic set of components to install the UniFi Access access system. The set is compatible with most electric locks, magnetic locks and a whole range of 12V accessories such as

The UniFi video camera G5 Flex offers, in addition to a futuristic design, 4MP resolution (2688 x 1512px at 30fps) thanks to a 5MP CMOS sensor, a wide-angle lens (approx. 2.8mm), viewing angle of 102.4° and a

The camera from the UniFi Protect family features an incredible 4/3" 10MP sensor (3840 x 2160px) at 30 fps with incredible low-light performance, attachable varifocal wide-angle 17mm lens from Olympus and audio micro

The camera from the UniFi Protect family features an incredible 4/3" 10MP sensor (3840 x 2160px) at 30 fps with incredible low-light performance, attachable varifocal 45mm long-range lens from Olympus and audio micro

UniFi Access Reader G2 is an NFC reader that is part of the UniFi Access solution. The reader for communicating with other elements uses a LAN port with 802.3af PoE support, it is easy to install under the plaster, i

UniFi Access Reader G2 Professional is an NFC reader with a touch screen for entering an access PIN and is part of the UniFi Access solution. The reader for communicating with other elements uses a LAN port with 802.3af PoE

A specially designed 2-wire cable for the UniFi Access system from Ubiquiti and is used to connect an electric or magnetic lock to the UniFi Access Hub. The cable is 152.4m long, consists of one pair of conductors and its white sheath

A specially designed 4-wire cable for the UniFi Access system from Ubiquiti and is used to connect an electric or magnetic lock as well as a manual switch (UA-Rescue) to the UniFi Access Hub. The cable is 152.4m long, composed of two pairs of c

The G5 Professional Bullet Camera from Ubiquiti is a camera with 8MP resolution (3840 x 2160px at 30 fps), really large 1/2" sensor, varifocal lens 4.1 to 12.3mm, motorized 3x optical zoom, viewing angle 35

The UVC-G4 Doorbell Pro PoE Kit is a set of indoor doorbell and outdoor push-button video doorbell with Ethernet-only data transmission. The outdoor unit features a front primary 5MP camera and a bottom secondary 8MP camera

Bullet camera AI Professional from Ubiquiti is a camera with 8MP resolution (3840 x 2160px at 30 fps), really large 1/1.8" sensor, varifocal lens 4.1 to 12.3mm, motorized 3x optical zoom, viewing angle 35 to

Optional accessories for the UVC G5 Professional camera. It is a night IR backlight with intense white LED light (600 lumens) and a range of up to 40m. The indisputable advantage is the simplicity of installation, co

The Ubiquiti POE-48-24W-WH is a grounded PoE injector with a maximum output power of 24 W. It provides one input port for a traditional LAN connection and a second port as a PoE output port. The maximum data transfer rate is 100 Mbps. Key Fe

The Ubiquiti UACC-OM-SM-10G-S-20 is an SFP+ data transmission module using single-mode optical fiber. The data transfer rate is 10 Gbps, the maximum power consumption is 1 W, and the transmission range reaches 10 km. SFP+ module

The UniFi G5 Bullet camera has a 5MP CMOS sensor with a resolution of 2688 x 1512 at 30fps, a lens with a focal length of about 4mm, observation angle of 84.4°, IR illuminator for night vision up to

Enterprise-grade access hub with entry and exit control to eight doors and battery backup support. (8) Lock terminals (12V or Dry) (8+8) Inputs for request-to-exit devices and door position sensors (8) PoE ports for A

Standalone insert that can be easily installed into an existing network equipment rack to create a clean, uniform aesthetic. Key features 1U 24-port blank patch panel with cable management bar Ideal for keystone modul

24-pack of snap-in inserts that cover unused ports on the UniFi 24-Port Blank Keystone Patch Panel while maintaining its aesthetic. Easy snap-in installation. Uniform aesthetic with 24-Port Blank Keystone Patch Panel Package contet

Powerful Ubiquiti U7 Pro access point in a pack of five units. It connects to the network via a standard LAN port with speeds of up to 2.5 Gb/s. Wireless frequencies include 2.4 GHz at 688 Mb/s, 5 GHz at 2880 Mb/s, and the 6 GHz ba

Nano-thin patch cable in category Cat6 with transparent connectors, packaged in sets of 24 units, is specially designed for use with switches from the UniFi Pro Max or Enterprise series. It supports PoE++ and speeds o

The UACC-Camera-DM-B is a durable mounting bracket designed for a pair of cameras from Ubiquiti UniFi. It supports installation on a wall, pole, or the option to mount on a 1 1/2" NPS threaded pipe (included in the package).

The UACC-Camera-DM-W is a durable mounting bracket designed for a pair of cameras from Ubiquiti UniFi. It supports installation on a wall, pole, or the option to mount on a 1 1/2" NPS threaded pipe (included in the package).

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a

The passive DAC cable is used for direct connection of two QSFP28 ports with a link speed of 100 Gbps. It is also compatible with QSFP+ (40 Gbps) ports and is suitable for creating short connections between switches. This cable has a