Wireless

MikroTik netPower 15FR is a reverse PoE switch with 16x 100Mbit ethernet ports, two SFP ports, DC power connector and two operating systems (ROS and SwOS). The first 15 LAN ports allow power through PoE IN and 16th port supports PoE o

MikroTik power adapter with 5V voltage, maximum current 1A, max. Power 5W and microUSB connector. This power source is suitable, for example, for MikroTik hAP mini, hAP lite and cAP lite.

Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz

R11e-2HnD is a Low-profile Lower power version of our 2.4Ghz miniPCIe card - it has a small heat-sink, u.Fl connector and less output power (800mW). Low profile is useful if you need to install the card in device like a laptop.

It reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life. It's made from a special material that has a low di

The Sleeve30 kit for mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces

The wAP R is a small weatherproof wireless access point with miniPCI-e slot reserved for LTE card. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP R also has

LDF 5 or "Lite dish feed" is a very specific outdoor CPE device with two built-in antennas with 9dBi gain. LDF 5 was designed for mounting on satellite dish antenna instead of the original feed LNB with 40 mm mounting. Antenna gain maybe increas

hEX PoE is a five port gigabit ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE

RB5009UPr+S+OUT is a high performance PoE router that comes with passive cooling, IP66 outdoor chassis and high performance (60 - 90% higher than RB4011) which is due to the 64-bit ARM architecture of the proc

Optical Cloud Router Switch CRS510-8XS-2XQ-IN is a suitable 19" rackmount solution for 100 Gbps network distribution and as a small central optical switch that offers 8x SFP28 with a speed of 25 Gbps, 2x QSFP28 with

A very elegant metal and easily mountable mounting frame from MikroTik, size 19" with height 10U is suitable for laboratory tables, exhibitions or demonstrations. It is not new and revolutionary product, it is more of a trifle that ca

Thanks to the miniPCIe card R11e-LR2, you can connect any MikroTik device to the LoRa network that has a slot for placing a miniPCI-e card. The card supports 4 different Rx channels from the 2.4 GHz frequency band (2403 MHz,

The new flagship Cloud Core Router 2216 with a very strong configuration designed for the most exposed places of your network and in compared to CCR1072 it is up to 4x more powerful!. There is 12x SFP28 at 1/10/25 Gbps,

The ATL 5G R16 by MikroTik is a high-performance outdoor device with support for 5G and LTE Cat 20, designed to deliver maximum performance even in demanding conditions. Thanks to its high-gain 16 dBi antenna and 4x4 MIMO technol

Replacement 500 W power supply for MikroTik CRS328-24P-4S+RM PoE switch.

Hot-swap 54.5V 10.35A power supply for the CRS320-8P-8B-4S+RM PoE++ switch. The switch comes with a single 600W PSU and an expansion slot for a second PSU that can raise the total power output all the way to 1150 Watts,

The Cloud Router Switch CRS304-4XG-IN is a compact yet highly powerful switch powered by the RouterOS operating system, offering advanced features such as port forwarding, VLAN, MAC address filtering, broadcast storm control, QoS, bandwidth limi

XS+85LC01D is a multimode SFP/SFP+SFP28 module with a maximum throughput of 25 Gbps, supporting lower speeds of 1 Gbps and 10 Gbps with a wavelength of 850 nm and two LC connectors for connections up to a distance of 100 m. The mod

Replacement 750 W power supply for MikroTik CRS354-48P-4S+2Q+RM PoE switch.

The LtAP LR8G LTE6 kit, equipped with the new LTE6 modem, is a compact and robust wireless access point with support for LTE Cat6, LoRa networks, LAN, GPS, a full-featured USB port, and a serial port for debugging. It offers the perfect solution

Mikrotik introduces the new Chateau LTE12 (2025) with an upgraded LTE modem. The Chateau LTE12 (2025) is a dual-band home WiFi router with 5x Gigabit LAN ports and a category 12 LTE modem, including a USB port. The modulation speed of the 2.4GHz

The MikroTik RDS2216 a high-performance, all-in-one storage, networking, and container platform designed for enterprise environments.. With support for 20x U.2 NVMe SSD, 100G network connectivity, and advanced containerization capabilitie

Replacement hot-swap power supply for the RDS2216. Output voltage and power: 12V / 550W

The CRS812 DDQ is a device designed for connecting network components with high data transfer requirements, supporting speeds of up to 400 Gbps. The unit is powered by a high-performance quad-core ARM AL52400 processor running at

Replacement 250 W hot-swap power supply for the CRS812-8DS-2DQ-2DDQ-RM switch. Can be replaced during operation without turning the device off or restarting it.

A 1 m direct-attach metallic cable for high-speed network connectivity (up to 400 Gb/s) with integrated QSFP-DD modules. Its short length makes it suitable for connecting devices over short distances, for example between racks in s

A 3 m direct-attach metallic cable for high-speed network connectivity (up to 400 Gb/s) with integrated QSFP-DD modules. Its short length makes it suitable for connecting devices over short distances, for example between racks in s

QSFP-DD is optical module for reliable 400 Gbps fiber connections. The transmission can operate over a distance of up to 100 m. The module includes built-in digital diagnostics for optical power, voltage, temperature, laser

The MikroTik KNOT LR8G kit is a compact, ready-to-use gateway designed for LoRa applications. It is engineered to provide affordable and reliable connectivity even in remote locations. It supports LTE CAT-M1 and NB2, Blue